Classes
class	ReductTarget
	Abstract base class for all reduction objects. More...

class	RTOpT
	Templated interface to vector reduction/transformation operators {abstract}. More...

class	UnknownError

class	InvalidUsage

class	InvalidNumVecs

class	InvalidNumTargVecs

class	IncompatibleVecs

class	IncompatibleReductObj

class	ConstSubVectorView
	Class for a non-changeable sub-vector. More...

class	SubVectorView
	Class for a changeable sub-vector. More...

class	ConstSubMultiVectorView
	Class for a non-changeable sub-multi-vector (submatrix). More...

class	SubMultiVectorView
	Class for a changeable sub-vector. More...

class	PrimitiveTypeTraits
	A templated traits class for decomposing object into an array of primitive objects. More...

class	PrimitiveTypeTraits< Scalar, Scalar >
	Specialization where the scalar type is the same as the concrete object type. More...

class	PrimitiveTypeTraits< Scalar, index_type >
	Specialization for index_type concrete object. More...

class	ROpGetElementEleWiseReductionOp

class	ROpGetElement
	Returns the value of the element at index `global_i`. More...

class	ROpGetSubVector
	Reduction operator that extracts a sub-vector in the range of global zero-based indexes [l,u]. More...

class	ROpMaxIndexEleWiseReductionOp

class	ROpMaxIndexReductObjReductionOp

class	ROpMaxIndex
	Returns the maximum element and its index: `result.scalar = x(k)` and `result.index = k` such that `x(k) >= x(i)` for `i=0...n-1` and `k` is the minimum index to break ties. More...

class	ROpMaxIndexLessThanBoundEleWiseReductionOp

class	ROpMaxIndexLessThanBound
	Returns the maximum element less than some bound along with its index: `result.scalar = x(k)` and `result.index = k` such that `x(k) >= x(i)` for all `i` where `x(i) < bound` and `k` is the minimum index to break ties. More...

class	ROpMinIndexEleWiseReductionOp

class	ROpMinIndexReductObjReductionOp

class	ROpMinIndex
	Returns the minimum element and its index: `result.scalar = x(k)` and `result.index = k` such that `x(k) <= x(i)` for `i=0...n-1` and `k` is the minimum index to break ties. More...

class	ROpMinIndexGreaterThanBoundEleWiseReductionOp

class	ROpMinIndexGreaterThanBound
	Returns the minimum element greater than some bound along with its index: `result.scalar = x(k)` and `result.index = k` such that `x(k) <= x(i)` for all `i` where `x(i) > bound` and `k` is the minimum index to break ties. More...

class	ROpNorm2EleWiseReduction

class	ROpNorm2
	Two (Euclidean) norm reduction operator: `result = sqrt( sum( conj(v0[i])*v0[i], i=0...n-1 ) )`. More...

class	ROpWeightedNorm2EleWiseReduction

class	ROpWeightedNorm2
	Weighted Two (Euclidean) norm reduction operator: `result = sqrt( sum( v0[i]conj(v1[i])v1[i], i=0...n-1 ) )`. More...

class	TOpAddScalarEleWiseTransformation
	Element-wise transformation operator for TOpAddScalar. More...

class	TOpAddScalar
	Add a scalar to a vector transformation operator: `z0[i] += alpha, i=0...n-1`. More...

class	TOpAssignScalarEleWiseTransformation
	Element-wise transformation operator for TOpAssignScalar. More...

class	TOpAssignScalar
	Assign a scalar to a vector transformation operator: `z0[i] = alpha, i=0...n-1`. More...

class	TOpAXPYEleWiseTransformation
	Element-wise transformation operator for TOpAXPY. More...

class	TOpAXPY
	AXPY transformation operator: `z0[i] += alpha*v0[i], i=0...n-1`. More...

class	TOpEleWiseConjProdEleWiseTransformation
	Element-wise transformation operator for TOpEleWiseConjProd. More...

class	TOpEleWiseConjProd
	Element-wise product transformation operator: `z0[i] += alphaconj(v0[i])v1[i], i=0...n-1`. More...

class	TOpEleWiseDivideEleWiseTransformation
	Element-wise transformation operator for TOpEleWiseDivide. More...

class	TOpEleWiseDivide
	Element-wise division transformation operator: `z0[i] += alpha*v0[i]/v1[i], i=0...n-1`. More...

class	TOpEleWiseProdEleWiseTransformation
	Element-wise transformation operator for TOpEleWiseProd. More...

class	TOpEleWiseProd
	Element-wise product transformation operator: `z0[i] += alphav0[i]v1[i], i=0...n-1`. More...

class	TOpEleWiseProdUpdateEleWiseTransformation
	Element-wise transformation operator for TOpEleWiseProdUpdate. More...

class	TOpEleWiseProdUpdate
	Element-wise product update transformation operator: `z0[i] = alphav0[i], i=0...n-1`. More...

class	TOpEleWiseScaleEleWiseTransformation
	Element-wise vector scaling op for TOpEleWiseScaling. More...

class	TOpEleWiseScale
	Element-wise vector scaling: `z0[i] *= v0[i], i=0...n-1`. More...

class	TOpLinearCombination
	Linear combination transformation operator: `z0[i] = beta*z0[i].` More...

class	TOpPairWiseMaxPairWiseTransformation
	Pair-wise transformation operator for TOpPairWiseMax. More...

class	TOpPairWiseMax
	Pair-wise Maximum transformation operator: `z0[i] = alpha*max(v0[i],v1[i]), i=0...n-1`. More...

class	TOpPairWiseMaxUpdatePairWiseTransformation
	Pair-wise transformation operator for TOpPairWiseMaxUpdate. More...

class	TOpPairWiseMaxUpdate
	Pair-wise Maximum update transformation operator: `z0[i] = alpha*max(z0[i],v0[i]), i=0...n-1`. More...

class	TOpRandomize
	Generate a random vector in the range [l,u]: `z0[i] = 0.5((u-l)Teuchos::ScalarTraits<Scalar>::random()+(u+l)), i=0...n-1`. More...

class	TOpScaleVectorEleWiseTransformation
	Element-wise transformation operator for TOpScaleVector. More...

class	TOpScaleVector
	Simple transformation operator that scales every vector element by a scalar `alpha`. More...

class	TOpSetAssendingValuesEleWiseTransformation
	Element-wise transformation for TOpSetAssendingValues. More...

class	TOpSetAssendingValues
	Set the elements of a vector to: `z0[i] = i+offset+1, i=0...n-1`. More...

class	TOpSetElementEleWiseTransformation
	Element-wise transformation for TOpSetElement. More...

class	TOpSetElement
	Set the elements of a vector to: `z0[i] = i+global_i+1, i=0...n-1`. More...

class	TOpSetSubVector
	Advanced transformation operator that assigns elements from a sparse explicit vector. More...

class	RTOpServer
	Server for creating `RTOpT` objects given just the operators name. More...

class	RTOpSubRangeDecorator
	Decorator subclass that restricts the range of elements to apply the underlying RTOpT object to. More...

struct	ScalarIndex
	Simple struct for a Scalar and an Ordinal object. More...

class	PrimitiveTypeTraits< Scalar, ScalarIndex< Scalar > >
	Partial specialization of `PrimitiveTypeTraits` for `ScalarIndex`. More...

class	DefaultReductTarget
	Simple `ReductTarget` subclass for simple scalar objects. More...

class	BasicReductObjReductionOp

class	BasicReductObjReductionOp< ConcreteReductObj, REDUCT_TYPE_SUM >

class	BasicReductObjReductionOp< ConcreteReductObj, REDUCT_TYPE_MAX >

class	BasicReductObjReductionOp< ConcreteReductObj, REDUCT_TYPE_MIN >

class	SumScalarReductObjReduction
	Null reduction object reduction operator. More...

class	ROpScalarReductionWithOpBase

class	ROp_1_ScalarReduction
	Base class for scalar reduction RTOps with one input vector. More...

class	ROp_1_CoordVariantScalarReduction
	Base class for coordinate-variant scalar reduction RTOps with one input vector. More...

class	ROp_2_ScalarReduction
	Base class for scalar reduction RTOps with two input vectors. More...

class	TOp_0_1_Base
	Base class for transformations for 0 input and 1 output vector. More...

class	TOp_0_1_CoordVariantBase
	Base class for coordinate variant transformations for 0 input and 1 output vector. More...

class	TOp_1_1_Base
	Base class for transformations for 1 input and 1 output vector. More...

class	TOp_2_1_Base
	Base class for transformations for 2 input and 1 output vector. More...

class	TOp_3_1_Base
	Base class for transformations for 3 input and 1 output vector. More...

class	SparseSubVectorT
	Class for a (sparse or dense) sub-vector. More...

class	ReductTargetSerializer
	Serializer subclass for `ReductTarget` objects. More...

class	ReductTargetReductionOp
	ReductionOp subclass for `ReductTarget` objects. More...

class	TOpUnaryFuncPtr
	`RTOpT` subclass for unary transformation functions using a function pointer. More...

Typedefs
typedef Teuchos_Ordinal	Ordinal

typedef Teuchos_Ordinal	index_type

typedef char	char_type

Enumerations
enum	ETransp { NOTRANS, TRANS, CONJTRANS }

enum	EBasicReductTypes { REDUCT_TYPE_SUM, REDUCT_TYPE_MAX, REDUCT_TYPE_MIN }

Functions
template<class Scalar >
void	assign_entries (const Ptr< const SubVectorView< Scalar > > &msv, const ConstSubVectorView< Scalar > &sv)

template<class Scalar >
void	assign_entries (const Ptr< const SubMultiVectorView< Scalar > > &msmv, const ConstSubMultiVectorView< Scalar > &smv)

template<class Scalar >
void	getrf (const SubMultiVectorView< Scalar > &A, const ArrayView< int > &ipiv, const Ptr< int > &rank)
	Peform an in-place factorization of a square or rectangular matrix. More...

template<class Scalar >
void	getrs (const ConstSubMultiVectorView< Scalar > &A, const ArrayView< const int > &ipiv, const ETransp transp, const Ptr< const SubMultiVectorView< Scalar > > &BX)

	RTOP_ROP_1_REDUCT_SCALAR (ROpCountNanInf, index_type, REDUCT_TYPE_SUM)
	Reduction operator that counts the number of entries that are NaN or Inf. More...

	RTOP_ROP_2_REDUCT_SCALAR (ROpDotProd, Scalar, REDUCT_TYPE_SUM)

	RTOP_ROP_1_REDUCT_SCALAR_CUSTOM_DEFAULT (ROpMax, Scalar, REDUCT_TYPE_MAX, Teuchos::as< Scalar >(-std::numeric_limits< Scalar >::max()))
	Maximum element: `result = max{ v0[i], i=0...n-1 }`. More...

	RTOP_ROP_1_REDUCT_SCALAR_CUSTOM_DEFAULT (ROpMin, Scalar, REDUCT_TYPE_MIN, std::numeric_limits< Scalar >::max())
	Minimum element: `result = min{ v0[i], i=0...n-1 }`. More...

	RTOP_ROP_1_REDUCT_SCALAR (ROpNorm1, typename ScalarTraits< Scalar >::magnitudeType, REDUCT_TYPE_SUM)
	Class ROpNorm1. More...

	RTOP_ROP_1_REDUCT_SCALAR (ROpNormInf, typename ScalarTraits< Scalar >::magnitudeType, REDUCT_TYPE_MAX)
	Norm Inf: `result = max(\|x[i]\|, i=0...n-1).` More...

	RTOP_ROP_1_REDUCT_SCALAR (ROpSum, Scalar, REDUCT_TYPE_SUM)
	Class ROpSum: `result = sum( v0[i], i=0...n-1 )` More...

	RTOP_TOP_1_1 (TOpAbs)
	Transformation operator that takes absolute values of elements: `z0[i] = abs(v0[i]), i=0...n-1`. More...

	RTOP_TOP_1_1 (TOpAssignVectors)
	VectorBase assignment transformation operator: `z0[i] = v0[i], i=0...n-1`. More...

	RTOP_TOP_1_1 (TOpReciprocal)
	VectorBase assignment transformation operator: `z0[i] = v0[i], i=0...n-1`. More...

std::string	version ()
	Print the version of RTOp. More...

template<class Scalar >
void	validate_apply_op (const RTOpT< Scalar > &op, const int allowed_num_sub_vecs, const int allowed_num_targ_sub_vecs, const bool expect_reduct_obj, const ArrayView< const ConstSubVectorView< Scalar > > &sub_vecs, const ArrayView< const SubVectorView< Scalar > > &targ_sub_vecs, const Ptr< const ReductTarget > &reduct_obj)
	Validate the input to an apply_op(...) function. More...

void	set_SPMD_apply_op_dump_out (const RCP< FancyOStream > &dumpOut)
	Set up to show a dump of RTOps applied through SPMD_apply_op(). More...

template<class PrimitiveScalar >
int	serializedSize (int num_values, int num_indexes, int num_chars)
	Return the size in bytes of an external representation of a `ReductTarget` object. More...

template<class Scalar >
void	serialize (const RTOpT< Scalar > &op, Ordinal num_values, Ordinal num_indexes, Ordinal num_chars, const ReductTarget &reduct_obj, char reduct_obj_ext[])
	Serialize a `ReductTarget` object. More...

template<class Scalar >
void	deserialize (const RTOpT< Scalar > &op, int num_values, int num_indexes, int num_chars, const char reduct_obj_ext[], ReductTarget *reduct_obj)
	Deserialize a `ReductTarget` object. More...

template<class Scalar >
void	SPMD_all_reduce (const Teuchos::Comm< index_type > comm, const RTOpT< Scalar > &op, const int num_cols, const ReductTarget const i_reduct_objs[], ReductTarget *const reduct_objs[])
	Reduce a set of reduction objects. More...

template<class Scalar >
void	SPMD_apply_op (const Teuchos::Comm< index_type > comm, const RTOpT< Scalar > &op, const int num_vecs, const ConstSubVectorView< Scalar > sub_vecs[], const int num_targ_vecs, const SubVectorView< Scalar > targ_sub_vecs[], ReductTarget reduct_obj)
	Apply an RTOp in SMPD mode to a set of vectors with contiguous storage per process. More...

template<class Scalar >
void	SPMD_apply_op (const Teuchos::Comm< index_type > comm, const RTOpT< Scalar > &op, const int num_cols, const int num_multi_vecs, const ConstSubMultiVectorView< Scalar > sub_multi_vecs[], const int num_targ_multi_vecs, const SubMultiVectorView< Scalar > targ_sub_multi_vecs[], ReductTarget const reduct_objs[])
	Apply an RTOp in SMPD mode to a set of columns to a set of multi-vectors with contiguous storage per process. More...

template<class Scalar >
void	SPMD_apply_op (const Teuchos::Comm< index_type > comm, const RTOpT< Scalar > &op, const int num_cols, const int num_vecs, const ConstSubVectorView< Scalar > sub_vecs[], const int num_targ_vecs, const SubVectorView< Scalar > sub_targ_vecs[], ReductTarget const reduct_objs[])
	Apply an RTOp in SMPD mode to a set of columns to a set of multi-vectors with contiguous storage per process. More...

RCP< FancyOStream > &	spmdApplyOpDumpOut ()

template<class Scalar >
void	print (const ConstSubVectorView< Scalar > &v, Teuchos::FancyOStream &out_arg)

Variables
const int	NUM_ETRANS_ARGS = 3

const Teuchos::Tuple< char, NUM_ETRANS_ARGS >	transpMap = Teuchos::tuple('N', 'T', 'C')

Typedef Documentation

typedef Teuchos_Ordinal RTOpPack::Ordinal

Definition at line 68 of file RTOpPack_Types.hpp.

typedef Teuchos_Ordinal RTOpPack::index_type

Definition at line 89 of file RTOpPack_Types.hpp.

typedef char RTOpPack::char_type

Definition at line 91 of file RTOpPack_Types.hpp.

Enumeration Type Documentation

enum RTOpPack::ETransp

Enumerator
NOTRANS
TRANS
CONJTRANS

Definition at line 56 of file RTOpPack_LapackWrappers.hpp.

enum RTOpPack::EBasicReductTypes

Enumerator
REDUCT_TYPE_SUM
REDUCT_TYPE_MAX
REDUCT_TYPE_MIN

Definition at line 243 of file RTOpPack_RTOpTHelpers_decl.hpp.

Function Documentation

template<class Scalar >

void RTOpPack::assign_entries	(	const Ptr< const SubVectorView< Scalar > > &	msv,
		const ConstSubVectorView< Scalar > &	sv
	)

Definition at line 288 of file RTOpPack_Types.hpp.

template<class Scalar >

void RTOpPack::assign_entries	(	const Ptr< const SubMultiVectorView< Scalar > > &	msmv,
		const ConstSubMultiVectorView< Scalar > &	smv
	)

Definition at line 535 of file RTOpPack_Types.hpp.

template<class Scalar >

void RTOpPack::getrf	(	const SubMultiVectorView< Scalar > &	A,
		const ArrayView< int > &	ipiv,
		const Ptr< int > &	rank
	)

Peform an in-place factorization of a square or rectangular matrix.

Parameters

A	[in/out] On input, contains the entries of the square matrix. On output, contains the L and U factors.
ipiv	[in] On output, contains the pivots used in the factorization. Note: This will be a 1-based valued array since this is a Fortran routine!
rank	[out] On output, gives the rank of the factorization.

Definition at line 102 of file RTOpPack_LapackWrappers.hpp.

template<class Scalar >

void RTOpPack::getrs	(	const ConstSubMultiVectorView< Scalar > &	A,
		const ArrayView< const int > &	ipiv,
		const ETransp	transp,
		const Ptr< const SubMultiVectorView< Scalar > > &	BX
	)

Definition at line 132 of file RTOpPack_LapackWrappers.hpp.

RTOpPack::RTOP_ROP_1_REDUCT_SCALAR	(	ROpCountNanInf	,
		index_type	,
		REDUCT_TYPE_SUM
	)

Reduction operator that counts the number of entries that are NaN or Inf.

Definition at line 55 of file RTOpPack_ROpCountNanInf.hpp.

RTOpPack::RTOP_ROP_2_REDUCT_SCALAR	(	ROpDotProd	,
		Scalar	,
		REDUCT_TYPE_SUM
	)

Definition at line 52 of file RTOpPack_ROpDotProd.hpp.

RTOpPack::RTOP_ROP_1_REDUCT_SCALAR_CUSTOM_DEFAULT	(	ROpMax	,
		Scalar	,
		REDUCT_TYPE_MAX	,
		Teuchos::as< Scalar >	-std::numeric_limits< Scalar >::max()
	)

Maximum element: result = max{ v0[i], i=0...n-1 }.

Definition at line 54 of file RTOpPack_ROpMax.hpp.

RTOpPack::RTOP_ROP_1_REDUCT_SCALAR_CUSTOM_DEFAULT	(	ROpMin	,
		Scalar	,
		REDUCT_TYPE_MIN	,
		std::numeric_limits< Scalar >::	max()
	)

Minimum element: result = min{ v0[i], i=0...n-1 }.

Definition at line 54 of file RTOpPack_ROpMin.hpp.

RTOpPack::RTOP_ROP_1_REDUCT_SCALAR	(	ROpNorm1	,
		typename ScalarTraits< Scalar >::magnitudeType	,
		REDUCT_TYPE_SUM
	)

Class ROpNorm1.

Definition at line 53 of file RTOpPack_ROpNorm1.hpp.

RTOpPack::RTOP_ROP_1_REDUCT_SCALAR	(	ROpNormInf	,
		typename ScalarTraits< Scalar >::magnitudeType	,
		REDUCT_TYPE_MAX
	)

Norm Inf: result = max(|x[i]|, i=0...n-1).

Definition at line 66 of file RTOpPack_ROpNormInf.hpp.

RTOpPack::RTOP_ROP_1_REDUCT_SCALAR	(	ROpSum	,
		Scalar	,
		REDUCT_TYPE_SUM
	)

Class ROpSum: result = sum( v0[i], i=0...n-1 )

Definition at line 52 of file RTOpPack_ROpSum.hpp.

RTOpPack::RTOP_TOP_1_1 ( TOpAbs )

Transformation operator that takes absolute values of elements: z0[i] = abs(v0[i]), i=0...n-1.

Definition at line 55 of file RTOpPack_TOpAbs.hpp.

RTOpPack::RTOP_TOP_1_1 ( TOpAssignVectors )

VectorBase assignment transformation operator: z0[i] = v0[i], i=0...n-1.

Definition at line 54 of file RTOpPack_TOpAssignVectors.hpp.

RTOpPack::RTOP_TOP_1_1 ( TOpReciprocal )

VectorBase assignment transformation operator: z0[i] = v0[i], i=0...n-1.

Definition at line 55 of file RTOpPack_TOpReciprocal.hpp.

std::string RTOpPack::version ( )

Print the version of RTOp.

Definition at line 48 of file RTOpPack_version.cpp.

template<class Scalar >

void RTOpPack::validate_apply_op	(	const RTOpT< Scalar > &	op,
		const int	allowed_num_sub_vecs,
		const int	allowed_num_targ_sub_vecs,
		const bool	expect_reduct_obj,
		const ArrayView< const ConstSubVectorView< Scalar > > &	sub_vecs,
		const ArrayView< const SubVectorView< Scalar > > &	targ_sub_vecs,
		const Ptr< const ReductTarget > &	reduct_obj
	)

Validate the input to an apply_op(...) function.

Parameters

op	[in] The RTOpT object we are validating apply_op(...) input for.
allowed_num_sub_vecs	[in] The allowed number of subvectors for sub_vecs.size(). If `allowed_num_sub_vecs < 0` then this number is not valided.
allowed_num_targ_sub_vecs	[in] The allowed number of subvectors for targ_sub_vecs.size(). If `allowed_num_targ_sub_vecs < 0` then this number is not valided.
expect_reduct_obj	[in] Determines if reduct_obj must be present or not and the type will be validated as well.
sub_vecs	[in] Input to apply_op(...) being validated
targ_sub_vecs	[in] Input to apply_op(...) being validated, not modified here
reduct_obj_in	[in] Input to apply_op(...) being validated

Definition at line 74 of file RTOpPack_RTOpTHelpers_def.hpp.

void RTOpPack::set_SPMD_apply_op_dump_out ( const RCP< FancyOStream > & dumpOut )

Set up to show a dump of RTOps applied through SPMD_apply_op().

Parameters

dumOut [in] RCP to output stream. If non-null, output will be dumped to this stream. If null, then no output will be dumped.

Definition at line 54 of file RTOpPack_SPMD_apply_op.cpp.

template<class PrimitiveScalar >

int RTOpPack::serializedSize	(	int	num_values,
		int	num_indexes,
		int	num_chars
	)

Return the size in bytes of an external representation of a ReductTarget object.

Definition at line 90 of file RTOpPack_SPMD_apply_op_def.hpp.

template<class Scalar >

void RTOpPack::serialize	(	const RTOpT< Scalar > &	op,
		Ordinal	num_values,
		Ordinal	num_indexes,
		Ordinal	num_chars,
		const ReductTarget &	reduct_obj,
		char	reduct_obj_ext[]
	)

Serialize a ReductTarget object.

Definition at line 104 of file RTOpPack_SPMD_apply_op_def.hpp.

template<class Scalar >

void RTOpPack::deserialize	(	const RTOpT< Scalar > &	op,
		int	num_values,
		int	num_indexes,
		int	num_chars,
		const char	reduct_obj_ext[],
		ReductTarget *	reduct_obj
	)

Deserialize a ReductTarget object.

Definition at line 143 of file RTOpPack_SPMD_apply_op_def.hpp.

template<class Scalar >

void RTOpPack::SPMD_all_reduce	(	const Teuchos::Comm< index_type > *	comm,
		const RTOpT< Scalar > &	op,
		const int	num_cols,
		const ReductTarget *const	i_reduct_objs[],
		ReductTarget *const	reduct_objs[]
	)

Reduce a set of reduction objects.

ToDo: Finish documentation!

Definition at line 313 of file RTOpPack_SPMD_apply_op_def.hpp.

template<class Scalar >

void RTOpPack::SPMD_apply_op	(	const Teuchos::Comm< index_type > *	comm,
		const RTOpT< Scalar > &	op,
		const int	num_vecs,
		const ConstSubVectorView< Scalar >	sub_vecs[],
		const int	num_targ_vecs,
		const SubVectorView< Scalar >	targ_sub_vecs[],
		ReductTarget *	reduct_obj
	)

Apply an RTOp in SMPD mode to a set of vectors with contiguous storage per process.

ToDo: Finish documentation!

Definition at line 346 of file RTOpPack_SPMD_apply_op_def.hpp.

template<class Scalar >

void RTOpPack::SPMD_apply_op	(	const Teuchos::Comm< index_type > *	comm,
		const RTOpT< Scalar > &	op,
		const int	num_cols,
		const int	num_multi_vecs,
		const ConstSubMultiVectorView< Scalar >	sub_multi_vecs[],
		const int	num_targ_multi_vecs,
		const SubMultiVectorView< Scalar >	targ_sub_multi_vecs[],
		RTOpPack::ReductTarget *const	reduct_objs[]
	)

Apply an RTOp in SMPD mode to a set of columns to a set of multi-vectors with contiguous storage per process.

ToDo: Finish documentation!

Definition at line 366 of file RTOpPack_SPMD_apply_op_def.hpp.

template<class Scalar >

void RTOpPack::SPMD_apply_op	(	const Teuchos::Comm< index_type > *	comm,
		const RTOpT< Scalar > &	op,
		const int	num_cols,
		const int	num_vecs,
		const ConstSubVectorView< Scalar >	sub_vecs[],
		const int	num_targ_vecs,
		const SubVectorView< Scalar >	sub_targ_vecs[],
		ReductTarget *const	reduct_objs[]
	)