Teuchos_DefaultComm.hpp

Go to the documentation of this file.

// @HEADER
// ***********************************************************************
//
//                    Teuchos: Common Tools Package
//                 Copyright (2004) Sandia Corporation
//
// Under terms of Contract DE-AC04-94AL85000, there is a non-exclusive
// license for use of this work by or on behalf of the U.S. Government.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// 1. Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// 3. Neither the name of the Corporation nor the names of the
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY SANDIA CORPORATION "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SANDIA CORPORATION OR THE
// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Questions? Contact Michael A. Heroux (maherou@sandia.gov)
//
// ***********************************************************************
// @HEADER

#ifndef TEUCHOS_DEFAULT_COMM_HPP
#define TEUCHOS_DEFAULT_COMM_HPP

#include "Teuchos_RCP.hpp"
#include "Teuchos_DefaultSerialComm.hpp"
#ifdef HAVE_MPI
#  include "Teuchos_DefaultMpiComm.hpp"
#endif

namespace Teuchos {

#ifdef HAVE_MPI
namespace Details {

template<class OrdinalType>
int
mpiFreeDefaultComm (MPI_Comm, int, void*, void*);

template<class OrdinalType>
int
mpiFreeDefaultSerialComm (MPI_Comm, int, void*, void*);

} // namespace Details
#endif // HAVE_MPI

template<typename OrdinalType>
class DefaultComm {
public:
  static Teuchos::RCP<const Comm<OrdinalType> > getComm ();

  static Teuchos::RCP<const Comm<OrdinalType> >
  getDefaultSerialComm (const Teuchos::RCP<const Comm<OrdinalType> >& comm);

private:
  static const Comm<OrdinalType>* comm_;

  static const Comm<OrdinalType>* defaultSerialComm_;

#ifdef HAVE_MPI
  template<class OT>
  friend int
  Details::mpiFreeDefaultComm (MPI_Comm, int, void*, void*);

  template<class OT>
  friend int
  Details::mpiFreeDefaultSerialComm (MPI_Comm, int, void*, void*);
#endif // HAVE_MPI

  static void freeDefaultComm () {
    if (comm_ != NULL) {
      delete comm_;
      comm_ = NULL;
    }
  }

  static void freeDefaultSerialComm () {
    if (defaultSerialComm_ != NULL) {
      delete defaultSerialComm_;
      defaultSerialComm_ = NULL;
    }
  }
};

#ifdef HAVE_MPI
namespace Details {

template<class OrdinalType>
int
mpiFreeDefaultComm (MPI_Comm, int, void*, void*)
{
  try {
    ::Teuchos::DefaultComm<OrdinalType>::freeDefaultComm ();
  } catch (...) {
    // Destructors must not throw exceptions, so we must accept the
    // possible memory leak and move on.
    std::cerr << "Teuchos::DefaultComm: Failed to free default Comm!  We can't "
      "throw an exception here because this is a singleton destructor that "
      "should only be called at MPI_Finalize or (if not building with MPI) at "
      "exit from main()." << std::endl;
    // FIXME (mfh 16 Nov 2014) There might be some way to create a
    // custom return code with MPI error reporting.  For now, we just
    // pick some error code not equal to MPI_SUCCESS.  It could
    // perhaps overlap with some existing error code.
    return (MPI_SUCCESS == 0) ? -1 : 0;
  }
  return MPI_SUCCESS;
}

template<class OrdinalType>
int
mpiFreeDefaultSerialComm (MPI_Comm, int, void*, void*)
{
  try {
    ::Teuchos::DefaultComm<OrdinalType>::freeDefaultSerialComm ();
  } catch (...) {
    // Destructors must not throw exceptions, so we must accept the
    // possible memory leak and move on.
    std::cerr << "Teuchos::DefaultComm: Failed to free default serial Comm!  "
      "We can't throw an exception here because this is a singleton destructor "
      "that should only be called at MPI_Finalize or (if not building with MPI)"
      " at exit from main()." << std::endl;
    // FIXME (mfh 16 Nov 2014) There might be some way to create a
    // custom return code with MPI error reporting.  For now, we just
    // pick some error code not equal to MPI_SUCCESS.  It could
    // perhaps overlap with some existing error code.
    return (MPI_SUCCESS == 0) ? -1 : 0;
  }
  return MPI_SUCCESS;
}

} // namespace Details
#endif // HAVE_MPI


template<typename OrdinalType>
Teuchos::RCP<const Teuchos::Comm<OrdinalType> >
DefaultComm<OrdinalType>::getComm ()
{
  if (comm_ == NULL) {
#ifdef HAVE_MPI
#  if MPI_VERSION >= 2

    comm_ = new MpiComm<OrdinalType> (MPI_COMM_WORLD);

    // We want comm_ to be deallocated when MPI_Finalize is called.
    // The standard idiom for this (look in the MPI standard) is to
    // register an attribute ((key,value) pair) with MPI_COMM_SELF,
    // with a custom "destructor" to be called at MPI_Finalize.

    // 'key' is an output argument of MPI_Comm_create_keyval.
    int key = MPI_KEYVAL_INVALID;
    int err =
      MPI_Comm_create_keyval (MPI_COMM_NULL_COPY_FN,
                              Details::mpiFreeDefaultComm<OrdinalType>,
                              &key,
                              NULL); // no extra state
    if (err != MPI_SUCCESS) {
      if (comm_ != NULL) { // clean up if MPI call fails
        delete comm_;
        comm_ = NULL;
      }
      TEUCHOS_TEST_FOR_EXCEPTION(true, std::runtime_error,
        "Teuchos::DefaultComm::getComm: MPI_Comm_create_keyval failed!");
    }
    int val = key; // doesn't matter

    // Attach the attribute to MPI_COMM_SELF.
    err = MPI_Comm_set_attr (MPI_COMM_SELF, key, &val);
    if (err != MPI_SUCCESS) {
      // MPI (versions up to and including 3.0) doesn't promise
      // correct behavior after any function returns something other
      // than MPI_SUCCESS.  Thus, it's not required to try to free the
      // new key via MPI_Comm_free_keyval.  Furthermore, if something
      // went wrong with MPI_Comm_set_attr, it's likely that the
      // attribute mechanism is broken.  Thus, it would be unwise to
      // call MPI_Comm_free_keyval.  However, we can still clean up
      // other data.
      if (comm_ != NULL) { // clean up if MPI call fails
        delete comm_;
        comm_ = NULL;
      }
      TEUCHOS_TEST_FOR_EXCEPTION(true, std::runtime_error,
        "Teuchos::DefaultComm::getComm: MPI_Comm_set_attr failed!");
    }

    // It looks weird to "free" the key right away.  However, this
    // does not actually cause the "destructor" to be called.  It only
    // gets called at MPI_FINALIZE.  See MPI 3.0 standard, Section
    // 6.7.2, MPI_COMM_FREE_KEYVAL:
    //
    // "Note that it is not erroneous to free an attribute key that is
    // in use, because the actual free does not transpire until after
    // all references (in other communicators on the process) to the
    // key have been freed.  These references need to be explicitly
    // freed by the program, either via calls to MPI_COMM_DELETE_ATTR
    // that free one attribute instance, or by calls to MPI_COMM_FREE
    // that free all attribute instances associated with the freed
    // communicator."
    //
    // We rely here on the latter mechanism.  MPI_FINALIZE calls
    // MPI_COMM_FREE on MPI_COMM_SELF, so we do not need to call it
    // explicitly.
    //
    // It's not clear what to do if the MPI_* calls above succeeded,
    // but this call fails (i.e., returns != MPI_SUCCESS).  We could
    // throw; this would make sense to do, because MPI (versions up to
    // and including 3.0) doesn't promise correct behavior after any
    // MPI function returns something other than MPI_SUCCESS.  We
    // could also be optimistic and just ignore the return value,
    // hoping that if the above calls succeeded, then the communicator
    // will get freed at MPI_FINALIZE, even though the unfreed key may
    // leak memory (see Bug 6338).  I've chosen the latter.
    (void) MPI_Comm_free_keyval (&key);

#  else // MPI_VERSION < 2
#    error "Sorry, you need an MPI implementation that supports at least MPI 2.0 in order to build this code.  MPI 2.0 came out in 1997.  I wrote this comment in 2017.  If you really _really_ want MPI 1.x support, please file a GitHub issue for this feature request at github.com/trilinos/trilinos/issues with an expression of its priority and we will get to it as soon as we can."
#  endif // MPI_VERSION >= 2

#else // NOT HAVE_MPI
    comm_ = new SerialComm<OrdinalType> ();
    // We want comm_ to be deallocated when main exits, so register
    // its deallocation function as an atexit handler.
    //
    // The POSIX standard allows atexit to fail, in particular if it
    // lacks space for registering more functions.  "[T]he application
    // should call sysconf() to obtain the value of {ATEXIT_MAX}, the
    // [maximum] number of functions that can be registered. There is
    // no way for an application to tell how many functions have
    // already been registered with atexit()."
    //
    // We don't do this here.  Instead, we just check atexit's return
    // code.  If it fails, we throw.
    int err = atexit (freeDefaultComm);
    if (err != 0) {
      if (comm_ != NULL) { // clean up if atexit fails
        delete comm_;
        comm_ = NULL;
      }
      TEUCHOS_TEST_FOR_EXCEPTION(true, std::runtime_error,
        "Teuchos::DefaultComm::getComm: atexit failed!");
    }
#endif // HAVE_MPI
  }

  TEUCHOS_TEST_FOR_EXCEPTION
    (comm_ == NULL, std::logic_error, "Teuchos::DefaultComm::getComm: "
     "comm_ == NULL before return.  This should never happen.  "
     "Please report this bug to the Teuchos developers.");

  // Return a nonowning RCP, because we need to ensure that
  // destruction happens at MPI_Finalize (or at exit of main(), if not
  // building with MPI).
  return rcp (comm_, false);
}

template<typename OrdinalType>
Teuchos::RCP<const Teuchos::Comm<OrdinalType> >
DefaultComm<OrdinalType>::
getDefaultSerialComm (const Teuchos::RCP<const Comm<OrdinalType> >& comm)
{
  if (! comm.is_null ()) {
    return comm;
  } else {
    if (defaultSerialComm_ == NULL) {
#ifdef HAVE_MPI
#  if MPI_VERSION >= 2
      //defaultSerialComm_ = new MpiComm<OrdinalType> (MPI_COMM_SELF);
      defaultSerialComm_ = new SerialComm<OrdinalType> ();

      // Register an MPI_Finalize hook to free defaultSerialComm_.
      // (See getComm implementation above in this file for details.)

      int key = MPI_KEYVAL_INVALID;
      int err =
        MPI_Comm_create_keyval (MPI_COMM_NULL_COPY_FN,
                                Details::mpiFreeDefaultSerialComm<OrdinalType>,
                                &key,
                                NULL); // no extra state
      if (err != MPI_SUCCESS) {
        if (defaultSerialComm_ != NULL) { // clean up if MPI call fails
          delete defaultSerialComm_;
          defaultSerialComm_ = NULL;
        }
        TEUCHOS_TEST_FOR_EXCEPTION(
          true, std::runtime_error, "Teuchos::DefaultComm::getDefaultSerialComm"
          ": MPI_Comm_create_keyval failed!");
      }
      int val = key; // doesn't matter

      // Attach the attribute to MPI_COMM_SELF.
      err = MPI_Comm_set_attr (MPI_COMM_SELF, key, &val);
      if (err != MPI_SUCCESS) {
        // See comments in getComm implementation above to see why we
        // don't call MPI_Comm_free_keyval here.
        if (defaultSerialComm_ != NULL) { // clean up if MPI call fails
          delete defaultSerialComm_;
          defaultSerialComm_ = NULL;
        }
        TEUCHOS_TEST_FOR_EXCEPTION(
          true, std::runtime_error, "Teuchos::DefaultComm::getDefaultSerialComm"
          ": MPI_Comm_set_attr failed!");
      }

      // See comments in getComm implementation above to see why we
      // _do_ call MPI_Comm_free_keyval here, and why we don't check
      // the return code.
      (void) MPI_Comm_free_keyval (&key);

#  else // MPI_VERSION < 2
#    error "Sorry, you need an MPI implementation that supports at least MPI 2.0 in order to build this code.  MPI 2.0 came out in 1997.  I wrote this comment in 2017.  If you really _really_ want MPI 1.x support, please file a GitHub issue for this feature request at github.com/trilinos/trilinos/issues with an expression of its priority and we will get to it as soon as we can."
#  endif // MPI_VERSION >= 2

#else // NOT HAVE_MPI
      defaultSerialComm_ = new SerialComm<OrdinalType> ();
      // We want defaultSerialComm_ to be deallocated when main exits,
      // so register its deallocation function as an atexit handler.
      //
      // The POSIX standard allows atexit to fail, in particular if it
      // lacks space for registering more functions.  "[T]he
      // application should call sysconf() to obtain the value of
      // {ATEXIT_MAX}, the [maximum] number of functions that can be
      // registered. There is no way for an application to tell how
      // many functions have already been registered with atexit()."
      //
      // We don't do this here.  Instead, we just check atexit's
      // return code.  If it fails, we throw.
      int err = atexit (freeDefaultComm);
      if (err != 0) {
        if (defaultSerialComm_ != NULL) { // clean up if atexit fails
          delete defaultSerialComm_;
          defaultSerialComm_ = NULL;
        }
        TEUCHOS_TEST_FOR_EXCEPTION(true, std::runtime_error,
          "Teuchos::DefaultComm::getDefaultSerialComm: atexit failed!");
      }
#endif // HAVE_MPI
    }

    TEUCHOS_TEST_FOR_EXCEPTION
      (defaultSerialComm_ == NULL, std::logic_error, "Teuchos::DefaultComm::"
       "getDefaultSerialComm: defaultSerialComm_ == NULL before return.  This sh"
       "ould never happen.  Please report this bug to the Teuchos developers.");

    // Return a nonowning RCP, because we need to ensure that
    // destruction happens at MPI_Finalize (or at exit of main(), if not
    // building with MPI).
    return rcp (defaultSerialComm_, false);
  }
}

template<typename OrdinalType>
const Teuchos::Comm<OrdinalType>*
DefaultComm<OrdinalType>::comm_ = NULL;

template<typename OrdinalType>
const Teuchos::Comm<OrdinalType>*
DefaultComm<OrdinalType>::defaultSerialComm_ = NULL;

} // namespace Teuchos

#endif // TEUCHOS_DEFAULT_COMM_HPP