Ifpack_OverlappingRowMatrix.cpp

Go to the documentation of this file.

/*@HEADER
// ***********************************************************************
//
//       Ifpack: Object-Oriented Algebraic Preconditioner Package
//                 Copyright (2002) Sandia Corporation
//
// Under terms of Contract DE-AC04-94AL85000, there is a non-exclusive
// license for use of this work by or on behalf of the U.S. Government.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// 1. Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// 3. Neither the name of the Corporation nor the names of the
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY SANDIA CORPORATION "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SANDIA CORPORATION OR THE
// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Questions? Contact Michael A. Heroux (maherou@sandia.gov)
//
// ***********************************************************************
//@HEADER
*/

#include "Ifpack_ConfigDefs.h"
#include "Ifpack_OverlappingRowMatrix.h"
#include "Epetra_RowMatrix.h"
#include "Epetra_Map.h"
#include "Epetra_CrsMatrix.h"
#include "Epetra_Comm.h"
#include "Epetra_MultiVector.h"

#ifdef HAVE_IFPACK_PARALLEL_SUBDOMAIN_SOLVERS
#include "Epetra_IntVector.h"
#include "Epetra_MpiComm.h"
#include "Teuchos_Hashtable.hpp"
#include "Teuchos_Array.hpp"
#include "EpetraExt_OperatorOut.h"
#include "EpetraExt_BlockMapOut.h"
#else
# ifdef IFPACK_NODE_AWARE_CODE
# include "Epetra_IntVector.h"
# include "Epetra_MpiComm.h"
# include "Teuchos_Hashtable.hpp"
# include "Teuchos_Array.hpp"
# include "EpetraExt_OperatorOut.h"
# include "EpetraExt_BlockMapOut.h"
  extern int ML_NODE_ID;
  int IFPACK_NODE_ID;
# endif
#endif

using namespace Teuchos;

// ====================================================================== 

template<typename int_type>
void Ifpack_OverlappingRowMatrix::BuildMap(int OverlapLevel_in)
{
  RCP<Epetra_Map> TmpMap;
  RCP<Epetra_CrsMatrix> TmpMatrix; 
  RCP<Epetra_Import> TmpImporter;

  // importing rows corresponding to elements that are 
  // in ColMap, but not in RowMap 
  const Epetra_Map *RowMap; 
  const Epetra_Map *ColMap; 

  std::vector<int_type> ExtElements; 

  for (int overlap = 0 ; overlap < OverlapLevel_in ; ++overlap) {
    if (TmpMatrix != Teuchos::null) {
      RowMap = &(TmpMatrix->RowMatrixRowMap()); 
      ColMap = &(TmpMatrix->RowMatrixColMap()); 
    }
    else {
      RowMap = &(A().RowMatrixRowMap()); 
      ColMap = &(A().RowMatrixColMap()); 
    }

    int size = ColMap->NumMyElements() - RowMap->NumMyElements(); 
    std::vector<int_type> list(size); 

    int count = 0; 

    // define the set of rows that are in ColMap but not in RowMap 
    for (int i = 0 ; i < ColMap->NumMyElements() ; ++i) { 
      int_type GID = (int_type) ColMap->GID64(i); 
      if (A().RowMatrixRowMap().LID(GID) == -1) { 
        typename std::vector<int_type>::iterator pos 
          = find(ExtElements.begin(),ExtElements.end(),GID); 
        if (pos == ExtElements.end()) { 
          ExtElements.push_back(GID);
          list[count] = GID; 
          ++count; 
        } 
      } 
    } 

    const int_type *listptr = NULL;
    if ( ! list.empty() ) listptr = &list[0];
    TmpMap = rcp( new Epetra_Map(-1,count, listptr,0,Comm()) ); 

    TmpMatrix = rcp( new Epetra_CrsMatrix(Copy,*TmpMap,0) ); 

    TmpImporter = rcp( new Epetra_Import(*TmpMap,A().RowMatrixRowMap()) ); 

    TmpMatrix->Import(A(),*TmpImporter,Insert); 
    TmpMatrix->FillComplete(A().OperatorDomainMap(),*TmpMap); 

  }

  // build the map containing all the nodes (original
  // matrix + extended matrix)
  std::vector<int_type> list(NumMyRowsA_ + ExtElements.size());
  for (int i = 0 ; i < NumMyRowsA_ ; ++i)
    list[i] = (int_type) A().RowMatrixRowMap().GID64(i);
  for (int i = 0 ; i < (int)ExtElements.size() ; ++i)
    list[i + NumMyRowsA_] = ExtElements[i];

  const int_type *listptr = NULL;
  if ( ! list.empty() ) listptr = &list[0];
  {
    Map_ = rcp( new Epetra_Map((int_type) -1, NumMyRowsA_ + ExtElements.size(),
                               listptr, 0, Comm()) );
  }
#ifdef HAVE_IFPACK_PARALLEL_SUBDOMAIN_SOLVERS
  colMap_ = &*Map_;
#else
# ifdef IFPACK_NODE_AWARE_CODE
  colMap_ = &*Map_;
# endif
#endif
  // now build the map corresponding to all the external nodes
  // (with respect to A().RowMatrixRowMap().
  {
    const int_type * extelsptr = NULL;
    if ( ! ExtElements.empty() ) extelsptr = &ExtElements[0];
    ExtMap_ = rcp( new Epetra_Map((int_type) -1,ExtElements.size(),
                                  extelsptr,0,A().Comm()) );
  }
}

// ====================================================================== 
// Constructor for the case of one core per subdomain
Ifpack_OverlappingRowMatrix::
Ifpack_OverlappingRowMatrix(const RCP<const Epetra_RowMatrix>& Matrix_in,
                            int OverlapLevel_in)  :
  Matrix_(Matrix_in),
  OverlapLevel_(OverlapLevel_in)
{
  // should not be here if no overlap
  if (OverlapLevel_in == 0)
    IFPACK_CHK_ERRV(-1);

  // nothing to do as well with one process
  if (Comm().NumProc() == 1)
    IFPACK_CHK_ERRV(-1);
  
  NumMyRowsA_ = A().NumMyRows();

  // construct the external matrix

#ifndef EPETRA_NO_32BIT_GLOBAL_INDICES
    if(A().RowMatrixRowMap().GlobalIndicesInt()) {
      BuildMap<int>(OverlapLevel_in);
    }
    else
#endif
#ifndef EPETRA_NO_64BIT_GLOBAL_INDICES
    if(A().RowMatrixRowMap().GlobalIndicesLongLong()) {
      BuildMap<long long>(OverlapLevel_in);
    }
    else
#endif
      throw "Ifpack_OverlappingRowMatrix::Ifpack_OverlappingRowMatrix: GlobalIndices type unknown";

  ExtMatrix_ = rcp( new Epetra_CrsMatrix(Copy,*ExtMap_,*Map_,0) ); 

  ExtImporter_ = rcp( new Epetra_Import(*ExtMap_,A().RowMatrixRowMap()) ); 
  ExtMatrix_->Import(A(),*ExtImporter_,Insert); 
  ExtMatrix_->FillComplete(A().OperatorDomainMap(),*Map_);

  Importer_ = rcp( new Epetra_Import(*Map_,A().RowMatrixRowMap()) );

  // fix indices for overlapping matrix
  NumMyRowsB_ = B().NumMyRows();
  NumMyRows_ = NumMyRowsA_ + NumMyRowsB_;
  NumMyCols_ = NumMyRows_;
  
  NumMyDiagonals_ = A().NumMyDiagonals() + B().NumMyDiagonals();
  
  NumMyNonzeros_ = A().NumMyNonzeros() + B().NumMyNonzeros();
  long long NumMyNonzeros_tmp = NumMyNonzeros_;
  Comm().SumAll(&NumMyNonzeros_tmp,&NumGlobalNonzeros_,1);
  MaxNumEntries_ = A().MaxNumEntries();
  
  if (MaxNumEntries_ < B().MaxNumEntries())
    MaxNumEntries_ = B().MaxNumEntries();

}

#ifdef HAVE_IFPACK_PARALLEL_SUBDOMAIN_SOLVERS

// ====================================================================== 
// Constructor for the case of two or more cores per subdomain
Ifpack_OverlappingRowMatrix::
Ifpack_OverlappingRowMatrix(const RCP<const Epetra_RowMatrix>& Matrix_in,
                            int OverlapLevel_in, int subdomainID)  :
  Matrix_(Matrix_in),
  OverlapLevel_(OverlapLevel_in)
{

  //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
  double t0 = MPI_Wtime();
  double t1, true_t0=t0;
#endif
  //FIXME timing

  const int votesMax = INT_MAX;

  // should not be here if no overlap
  if (OverlapLevel_in == 0)
    IFPACK_CHK_ERRV(-1);

  // nothing to do as well with one process
  if (Comm().NumProc() == 1)
    IFPACK_CHK_ERRV(-1);

  // subdomainID is the node (aka socket) number, and so is system dependent
  // nodeComm is the communicator for all the processes on a particular node
  // these processes will have the same subdomainID.
# ifdef HAVE_MPI
  const Epetra_MpiComm *pComm = dynamic_cast<const Epetra_MpiComm*>( &Comm() );
  assert(pComm != NULL);
  MPI_Comm nodeMPIComm;
  MPI_Comm_split(pComm->Comm(),subdomainID,pComm->MyPID(),&nodeMPIComm);
  Epetra_MpiComm *nodeComm = new Epetra_MpiComm(nodeMPIComm);
# else
  Epetra_SerialComm *nodeComm =  dynamic_cast<Epetra_MpiComm*>( &(Matrix_in->RowMatrixRowMap().Comm()) );
# endif
  
  NumMyRowsA_ = A().NumMyRows();

  RCP<Epetra_Map> TmpMap;
  RCP<Epetra_CrsMatrix> TmpMatrix; 
  RCP<Epetra_Import> TmpImporter;

  // importing rows corresponding to elements that are 
  // in ColMap, but not in RowMap 
  const Epetra_Map *RowMap; 
  const Epetra_Map *ColMap; 
  const Epetra_Map *DomainMap;

  // TODO Count #connections from nodes I own to each ghost node


  //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
  t1 = MPI_Wtime(); 
  fprintf(stderr,"[node %d]: time for initialization %2.3e\n", subdomainID, t1-t0);
  t0=t1;
#endif
  //FIXME timing

#ifdef IFPACK_OVA_TIME_BUILD
  t1 = MPI_Wtime();
  fprintf(stderr,"[node %d]: overlap hash table allocs %2.3e\n", subdomainID, t1-t0);
  t0=t1;
#endif

  Teuchos::Hashtable<int,int> colMapTable(3 * A().RowMatrixColMap().NumMyElements() );

  // ghostTable holds off-node GIDs that are connected to on-node rows and can potentially be this PID's overlap
  // TODO hopefully 3 times the # column entries is a reasonable table size
  Teuchos::Hashtable<int,int> ghostTable(3 * A().RowMatrixColMap().NumMyElements() );

  /* ** ************************************************************************** ** */
  /* ** ********************** start of main overlap loop ************************ ** */
  /* ** ************************************************************************** ** */
  for (int overlap = 0 ; overlap < OverlapLevel_in ; ++overlap)
  {
    // nbTable holds node buddy GIDs that are connected to current PID's rows, i.e., GIDs that should be in the overlapped
    // matrix's column map

    if (TmpMatrix != Teuchos::null) {
      RowMap = &(TmpMatrix->RowMatrixRowMap()); 
      ColMap = &(TmpMatrix->RowMatrixColMap()); 
      DomainMap = &(TmpMatrix->OperatorDomainMap());
    }
    else {
      RowMap = &(A().RowMatrixRowMap()); 
      ColMap = &(A().RowMatrixColMap()); 
      DomainMap = &(A().OperatorDomainMap());
    }

#ifdef IFPACK_OVA_TIME_BUILD
    t1 = MPI_Wtime();
    fprintf(stderr,"[node %d]: overlap pointer pulls %2.3e\n", subdomainID, t1-t0);
    t0=t1;
#endif
    
    // For each column ID, determine the owning node (as opposed to core)
    // ID of the corresponding row.
    Epetra_IntVector colIdList( *ColMap );
    Epetra_IntVector rowIdList(*DomainMap);
    rowIdList.PutValue(subdomainID);  
    Teuchos::RCP<Epetra_Import> nodeIdImporter = rcp(new Epetra_Import( *ColMap, *DomainMap ));

#ifdef IFPACK_OVA_TIME_BUILD
    t1 = MPI_Wtime();
    fprintf(stderr,"[node %d]: overlap intvector/importer allocs %2.3e\n", subdomainID, t1-t0);
    t0=t1;
#endif
    
    colIdList.Import(rowIdList,*nodeIdImporter,Insert);
    
    int size = ColMap->NumMyElements() - RowMap->NumMyElements(); 
    int count = 0; 

#ifdef IFPACK_OVA_TIME_BUILD
    t1 = MPI_Wtime();
    fprintf(stderr,"[node %d]: overlap col/row ID imports %2.3e\n", subdomainID, t1-t0);
    t0=t1;
#endif

    
    // define the set of off-node rows that are in ColMap but not in RowMap
    // This naturally does not include off-core rows that are on the same node as me, i.e., node buddy rows.
    for (int i = 0 ; i < ColMap->NumMyElements() ; ++i) {
      int GID = ColMap->GID(i); 
      int myvotes=0;
      if (ghostTable.containsKey(GID)) myvotes = ghostTable.get(GID);
      if ( colIdList[i] != subdomainID && myvotes < votesMax) // don't include anybody found in a previous round
      {
        int votes;
        if (ghostTable.containsKey(GID)) {
          votes = ghostTable.get(GID);
          votes++;
          ghostTable.put(GID,votes);
        } else {
          ghostTable.put(GID,1);
        }
      }
    } //for (int i = 0 ; i < ColMap->NumMyElements() ; ++i)

    Teuchos::Array<int> gidsarray,votesarray;
    ghostTable.arrayify(gidsarray,votesarray);
    int *gids = gidsarray.getRawPtr();
    int *votes = votesarray.getRawPtr();

    /*
       This next bit of code decides which node buddy (NB) gets which ghost points.  Everyone sends their
       list of ghost points to pid 0 of the local subcommunicator.  Pid 0 decides who gets what:

          - if a ghost point is touched by only one NB, that NB gets the ghost point
          - if two or more NBs share a ghost point, whichever NB has the most connections to the ghost
            point gets it.
    */

#   ifdef HAVE_MPI  //FIXME What if we build in serial?!  This file will likely not compile.
    int *cullList;
    int ncull;
    //int mypid = nodeComm->MyPID();

    //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
    t1 = MPI_Wtime();
    fprintf(stderr,"[node %d]: overlap before culling %2.3e\n", subdomainID, t1-t0);
    t0=t1;
#endif
    //FIXME timing


    if (nodeComm->MyPID() == 0)
    {
      // Figure out how much pid 0 is to receive
      MPI_Status status;
      int *lengths = new int[nodeComm->NumProc()+1];
      lengths[0] = 0;
      lengths[1] = ghostTable.size();
      for (int i=1; i<nodeComm->NumProc(); i++) {
        int leng;
        MPI_Recv( &leng, 1, MPI_INT, i, MPI_ANY_TAG, nodeComm->Comm(), &status);
        lengths[i+1] = lengths[i] + leng;
      }
      int total = lengths[nodeComm->NumProc()];

      int* ghosts = new int[total];
      for (int i=0; i<total; i++) ghosts[i] = -9;
      int *round  = new int[total];
      int *owningpid  = new int[total];

      for (int i=1; i<nodeComm->NumProc(); i++) {
        int count = lengths[i+1] - lengths[i];
        MPI_Recv( ghosts+lengths[i], count, MPI_INT, i, MPI_ANY_TAG, nodeComm->Comm(), &status);
        MPI_Recv( round+lengths[i], count, MPI_INT, i, MPI_ANY_TAG, nodeComm->Comm(), &status);
      }

      // put in pid 0's info
      for (int i=0; i<lengths[1]; i++) {
        ghosts[i] = gids[i];
        round[i] = votes[i];
        owningpid[i] = 0;
      }

      // put in the pid associated with each ghost
      for (int j=1; j<nodeComm->NumProc(); j++) {
        for (int i=lengths[j]; i<lengths[j+1]; i++) {
          owningpid[i] = j;
        }
      }

      // sort everything based on the ghost gids
      int* roundpid[2];
      roundpid[0] = round; roundpid[1] = owningpid;
      Epetra_Util epetraUtil;
      epetraUtil.Sort(true,total,ghosts,0,0,2,roundpid);

      //set up arrays that get sent back to node buddies and that tell them what ghosts to cull
      int *nlosers = new int[nodeComm->NumProc()];
      int** losers = new int*[nodeComm->NumProc()];
      for (int i=0; i<nodeComm->NumProc(); i++) {
        nlosers[i] = 0;
        losers[i] = new int[ lengths[i+1]-lengths[i] ];
      }

      // Walk through ghosts array and and for each sequence of duplicate ghost GIDs, choose just one NB to keep it.
      // The logic is pretty simple.  The ghost list is sorted, so all duplicate PIDs are together.
      // The list is traversed.  As duplicates are found, node pid 0 keeps track of the current "winning"
      // pid.  When a pid is determined to have "lost" (less votes/connections to the current GID), the
      // GID is added to that pid's list of GIDs to be culled.  At the end of the repeated sequence, we have
      // a winner, and other NBs know whether they need to delete it from their import list.
      int max=0;   //for duplicated ghosts, index of pid with most votes and who hence keeps the ghost.
                   // TODO to break ties randomly

      for (int i=1; i<total; i++) {
        if (ghosts[i] == ghosts[i-1]) {
          int idx = i; // pid associated with idx is current "loser"
          if (round[i] > round[max]) {
            idx = max;
            max=i;
          }
          int j = owningpid[idx];
          losers[j][nlosers[j]++] = ghosts[idx];
        } else {
          max=i;
        }
      } //for (int i=1; i<total; i++)

      delete [] round;
      delete [] ghosts;
      delete [] owningpid;

      // send the arrays of ghost GIDs to be culled back to the respective node buddies
      for (int i=1; i<nodeComm->NumProc(); i++) {
        MPI_Send( nlosers+i, 1, MPI_INT, i, 8675, nodeComm->Comm());
        MPI_Send( losers[i], nlosers[i], MPI_INT, i, 8675, nodeComm->Comm());
      }

      //FIXME Unnecessary memory allocation and copying, but makes culling code cleaner
      //Could we stick this info into gids and votes, since neither is being used anymore?
      //TODO Instead of using "losers" arrays, just use "cullList" as in the else clause
      ncull = nlosers[0];
      cullList = new int[ncull+1];
      for (int i=0; i<nlosers[0]; i++)
        cullList[i] = losers[0][i];

      for (int i=0; i<nodeComm->NumProc(); i++)
        delete [] losers[i];

      delete [] lengths;
      delete [] losers;
      delete [] nlosers;

    } else { //everyone but pid 0

      // send to node pid 0 all ghosts that this pid could potentially import
      int hashsize = ghostTable.size();
      MPI_Send( &hashsize, 1, MPI_INT, 0, 8675, nodeComm->Comm());
      MPI_Send( gids, hashsize, MPI_INT, 0, 8675, nodeComm->Comm());
      MPI_Send( votes, hashsize, MPI_INT, 0, 8675, nodeComm->Comm());

      // receive the ghost GIDs that should not be imported (subset of the list sent off just above)
      MPI_Status status;
      MPI_Recv( &ncull, 1, MPI_INT, 0, 8675, nodeComm->Comm(), &status);
      cullList = new int[ncull+1];
      MPI_Recv( cullList, ncull, MPI_INT, 0, 8675, nodeComm->Comm(), &status);
    }


    //TODO clean out hash table after each time through overlap loop   4/1/07 JJH done moved both hash tables to local scope

    // Remove from my row map all off-node ghosts that will be imported by a node buddy.
    for (int i=0; i<ncull; i++) {
      try{ghostTable.remove(cullList[i]);}

      catch(...) {
        printf("pid %d: In OverlappingRowMatrix ctr, problem removing ghost elt %d from ghostTable\n",
               Comm().MyPID(),cullList[i]);
        fflush(stdout);
      }
    }//for

    delete [] cullList;

    // Save off the remaining ghost GIDs from the current overlap round.
    // These are off-node GIDs (rows) that I will import.
    gidsarray.clear(); votesarray.clear();
    ghostTable.arrayify(gidsarray,votesarray);

    std::vector<int> list(size); 
    count=0;
    for (int i=0; i<ghostTable.size(); i++) {
      // if votesarray[i] == votesmax, then this GID was found during a previous overlap round
      if (votesarray[i] < votesMax) {
        list[count] = gidsarray[i];
        ghostTable.put(gidsarray[i],votesMax); //set this GID's vote to the maximum so that this PID alway wins in any subsequent overlap tiebreaking.
        count++;
      }
    }

    //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
    t1 = MPI_Wtime();
    fprintf(stderr,"[node %d]: overlap duplicate removal %2.3e\n", subdomainID, t1-t0);
    t0=t1;
#endif
    //FIXME timing

#   endif //ifdef HAVE_MPI

    TmpMap = rcp( new Epetra_Map(-1,count, &list[0],0,Comm()) );

    TmpMatrix = rcp( new Epetra_CrsMatrix(Copy,*TmpMap,0) ); 

    TmpImporter = rcp( new Epetra_Import(*TmpMap,A().RowMatrixRowMap()) ); 

    TmpMatrix->Import(A(),*TmpImporter,Insert); 
    TmpMatrix->FillComplete(A().OperatorDomainMap(),*TmpMap); 

    //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
    t1 = MPI_Wtime();
    fprintf(stderr,"[node %d]: overlap TmpMatrix fillcomplete %2.3e\n", subdomainID, t1-t0);
    t0=t1;
#endif
    //FIXME timing


    // These next two imports get the GIDs that need to go into the column map of the overlapped matrix.

    // For each column ID in the overlap, determine the owning node (as opposed to core)
    // ID of the corresponding row.  Save those column IDs whose owning node is the current one.
    // This should get all the imported ghost GIDs.
    Epetra_IntVector ov_colIdList( TmpMatrix->ColMap() );
    ov_colIdList.PutValue(-1);
    Epetra_IntVector ov_rowIdList( TmpMatrix->RowMap() );
    ov_rowIdList.PutValue(subdomainID);  
    Teuchos::RCP<Epetra_Import> ov_nodeIdImporter = rcp(new Epetra_Import( TmpMatrix->ColMap(), TmpMatrix->RowMap()));
    ov_colIdList.Import(ov_rowIdList,*ov_nodeIdImporter,Insert);

    for (int i=0 ; i<ov_colIdList.MyLength(); i++) {
       if (ov_colIdList[i] == subdomainID) {
         int GID = (ov_colIdList.Map()).GID(i);
         colMapTable.put(GID,1);
       }
    }

    // Do a second import of the owning node ID from A's rowmap to TmpMat's column map.  This ensures that
    // all GIDs that belong to a node buddy and are in a ghost row's sparsity pattern will be in the final
    // overlapped matrix's column map.
    ov_colIdList.PutValue(-1);
    Epetra_IntVector ArowIdList( A().RowMatrixRowMap() );
    ArowIdList.PutValue(subdomainID);
    nodeIdImporter = rcp(new Epetra_Import( TmpMatrix->ColMap(), A().RowMatrixRowMap() ));
    ov_colIdList.Import(ArowIdList,*nodeIdImporter,Insert);

    for (int i=0 ; i<ov_colIdList.MyLength(); i++) {
       if (ov_colIdList[i] == subdomainID) {
         int GID = (ov_colIdList.Map()).GID(i);
         colMapTable.put(GID,1);
       }
    }

    //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
    t1 = MPI_Wtime();
    fprintf(stderr,"[node %d]: overlap 2 imports to fix up colmap %2.3e\n", subdomainID, t1-t0);
    t0=t1;
#endif
    //FIXME timing

  } //for (int overlap = 0 ; overlap < OverlapLevel_in ; ++overlap)

  /* ** ************************************************************************ ** */
  /* ** ********************** end of main overlap loop ************************ ** */
  /* ** ************************************************************************ ** */

  // off-node GIDs that will be in the overlap
  std::vector<int> ghostElements; 

  Teuchos::Array<int> gidsarray,votesarray;
  ghostTable.arrayify(gidsarray,votesarray);
  for (int i=0; i<ghostTable.size(); i++) {
    ghostElements.push_back(gidsarray[i]);
  }

    for (int i = 0 ; i < A().RowMatrixColMap().NumMyElements() ; ++i) {
      int GID = A().RowMatrixColMap().GID(i);
      // Remove any entries that are in A's original column map
      if (colMapTable.containsKey(GID)) {
        try{colMapTable.remove(GID);}
        catch(...) {
          printf("pid %d: In OverlappingRowMatrix ctr, problem removing entry %d from colMapTable\n", Comm().MyPID(),GID);
          fflush(stdout);
        }
      }
    }

    // GIDs that will be in the overlapped matrix's column map
    std::vector<int> colMapElements; 

  gidsarray.clear(); votesarray.clear();
  colMapTable.arrayify(gidsarray,votesarray);
  for (int i=0; i<colMapTable.size(); i++)
    colMapElements.push_back(gidsarray[i]);

/*
   We need two maps here.  The first is the row map, which we've got by using my original rows
   plus whatever I've picked up in ghostElements.

   The second is a column map.  This map should include my rows, plus any columns that could come from node buddies.
   These GIDs come from the std:array colMapElements, which in turn comes from colMapTable.
   This map should *not* omit ghosts that have been imported by my node buddies, i.e., for any row that I own,
   the stencil should include all column GIDs (including imported ghosts) that are on the node.
*/

  // build the row map containing all the nodes (original matrix + off-node matrix)
  std::vector<int> rowList(NumMyRowsA_ + ghostElements.size());
  for (int i = 0 ; i < NumMyRowsA_ ; ++i)
    rowList[i] = A().RowMatrixRowMap().GID(i);
  for (int i = 0 ; i < (int)ghostElements.size() ; ++i)
    rowList[i + NumMyRowsA_] = ghostElements[i];

  // row map for the overlapped matrix (local + overlap)
  Map_ = rcp( new Epetra_Map(-1, NumMyRowsA_ + ghostElements.size(), &rowList[0], 0, Comm()) );

  // build the column map for the overlapping matrix
  //vector<int> colList(colMapElements.size());
  // column map for the overlapped matrix (local + overlap)
  //colMap_ = rcp( new Epetra_Map(-1, colMapElements.size(), &colList[0], 0, Comm()) );
  //for (int i = 0 ; i < (int)colMapElements.size() ; i++)
  //  colList[i] = colMapElements[i];
  std::vector<int> colList(A().RowMatrixColMap().NumMyElements() + colMapElements.size());
  int nc = A().RowMatrixColMap().NumMyElements();
  for (int i = 0 ; i < nc; i++)
    colList[i] = A().RowMatrixColMap().GID(i);
  for (int i = 0 ; i < (int)colMapElements.size() ; i++)
    colList[nc+i] = colMapElements[i];

  // column map for the overlapped matrix (local + overlap)
  //colMap_ = rcp( new Epetra_Map(-1, A().RowMatrixColMap().NumMyElements() + colMapElements.size(), &colList[0], 0, Comm()) );
  colMap_ = new Epetra_Map(-1, A().RowMatrixColMap().NumMyElements() + colMapElements.size(), &colList[0], 0, Comm());
    

  //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
  t1 = MPI_Wtime();
  fprintf(stderr,"[node %d]: time to init B() col/row maps %2.3e\n", subdomainID, t1-t0);
  t0=t1;
#endif
  //FIXME timing

  //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  //++++ start of sort
  //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  // build the column map, but don't use a copy constructor, b/c local communicator SubComm_ is
  // different from that of Matrix.
  try {
    // build row map based on the local communicator.  We need this temporarily to build the column map.
    Epetra_Map* nodeMap = new Epetra_Map(-1,NumMyRowsA_ + ghostElements.size(),&rowList[0],0,*nodeComm);
    int numMyElts = colMap_->NumMyElements();
    assert(numMyElts!=0);

    // The column map *must* be sorted: first locals, then ghosts.  The ghosts
    // must be further sorted so that they are contiguous by owning processor.

    // For each GID in column map, determine owning PID in local communicator.
    int* myGlobalElts = new int[numMyElts];
    colMap_->MyGlobalElements(myGlobalElts);
    int* pidList = new int[numMyElts];
    nodeMap->RemoteIDList(numMyElts, myGlobalElts, pidList, 0);

    // First sort column map GIDs based on the owning PID in local communicator.
    Epetra_Util Util;
    int *tt[1];
    tt[0] = myGlobalElts;
    Util.Sort(true, numMyElts, pidList, 0, (double**)0, 1, tt);

    // For each remote PID, sort the column map GIDs in ascending order.
    // Don't sort the local PID's entries.
    int localStart=0;
    while (localStart<numMyElts) {
      int currPID = (pidList)[localStart];
      int i=localStart;
      while (i<numMyElts && (pidList)[i] == currPID) i++;
      if (currPID != nodeComm->MyPID())
        Util.Sort(true, i-localStart, (myGlobalElts)+localStart, 0, 0, 0, 0);
      localStart = i;
    }

    // now move the local entries to the front of the list
    localStart=0;
    while (localStart<numMyElts && (pidList)[localStart] != nodeComm->MyPID()) localStart++;
    assert(localStart != numMyElts);
    int localEnd=localStart;
    while (localEnd<numMyElts && (pidList)[localEnd] == nodeComm->MyPID()) localEnd++;
    int* mySortedGlobalElts = new int[numMyElts];
    int leng = localEnd - localStart;
    /* This is a little gotcha.  It appears that the ordering of the column map's local entries
       must be the same as that of the domain map's local entries.  See the comment in method
       MakeColMap() in Epetra_CrsGraph.cpp, line 1072. */
    int *rowGlobalElts =  nodeMap->MyGlobalElements();

    /*TODO TODO TODO NTS rows 68 and 83 show up as local GIDs in rowGlobalElts for both pids 0 & 1 on node 0.
                    This seems to imply that there is something wrong with rowList!!
                    It is ok for the overlapped matrix's row map to have repeated entries (it's overlapped, after all).
                    But ... on a node, there should be no repeats.
                    Ok, here's the underlying cause.  On node 0, gpid 1 finds 83 on overlap round 0.  gpid 0 finds 83
                    on overlap round 1.  This shouldn't happen .. once a node buddy "owns" a row, no other node buddy
                    should ever import ("own") that row.

                    Here's a possible fix.  Extend tie breaking across overlap rounds.  This means sending to lpid 0
                    a list of *all* rows you've imported (this round plus previous rounds) for tie-breaking
                    If a nb won a ghost row in a previous round, his votes for that ghost row should be really high, i.e.,
                    he should probably win that ghost row forever.
                    7/17/09

      7/28/09 JJH I believe I've fixed this, but I thought it might be helpful to have this comment in here, in case I missed something.
    */

    //move locals to front of list
    for (int i=0; i<leng; i++) {
      /* //original code */
      (mySortedGlobalElts)[i] = rowGlobalElts[i];
      //(&*mySortedGlobalElts)[i] = (&*myGlobalElts)[localStart+i];
      //(&*mySortedPidList)[i] = (&*pidList)[localStart+i];
    }
    for (int i=leng; i< localEnd; i++) {
      (mySortedGlobalElts)[i] = (myGlobalElts)[i-leng];
    }
    for (int i=localEnd; i<numMyElts; i++) {
      (mySortedGlobalElts)[i] = (myGlobalElts)[i];
    }

    //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
    t1 = MPI_Wtime();
    fprintf(stderr,"[node %d]: time to sort col map arrays (cp=1) %2.3e\n", subdomainID, t1-t0);
    t0=t1;
#endif
    //FIXME timing

    int indexBase = colMap_->IndexBase();
    if (colMap_) delete colMap_;
    colMap_ = new Epetra_Map(-1,numMyElts,mySortedGlobalElts,indexBase,Comm());

    delete nodeMap;
    delete [] myGlobalElts;
    delete [] pidList;
    delete [] mySortedGlobalElts;

  } //try
  catch(...) {
    printf("** * Ifpack_OverlappingRowmatrix ctor: problem creating column map * **\n\n");
  }

  //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  //++++ end of sort
  //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

  //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
  t1 = MPI_Wtime();
  fprintf(stderr,"[node %d]: time to sort col map arrays (cp=2) %2.3e\n", subdomainID, t1-t0);
  t0=t1;
#endif
  //FIXME timing


/*

   FIXME
   Does the column map need to be sorted for the overlapping matrix?

   The column map *must* be sorted:

        first locals
        then ghosts

   The ghosts must be further sorted so that they are contiguous by owning processor

  int* RemoteSizeList = 0
  int* RemoteColIndices = ColIndices.Values() + NumLocalColGIDs; // Points to back end of ColIndices

  EPETRA_CHK_ERR(DomainMap.RemoteIDList(NumRemoteColGIDs, RemoteColIndices, PIDList.Values(), 0, RemoteSizeList));
  Epetra_Util epetraUtil;
  SortLists[0] = RemoteColIndices;
  SortLists[1] = RemoteSizeList;
  epetraUtil.Sort(true, NumRemoteColGIDs, PIDList.Values(), 0, 0, NLists, SortLists);
*/

  // now build the map corresponding to all the external nodes
  // (with respect to A().RowMatrixRowMap().
  ExtMap_ = rcp( new Epetra_Map(-1,ghostElements.size(), &ghostElements[0],0,Comm()) );
  ExtMatrix_ = rcp( new Epetra_CrsMatrix(Copy,*ExtMap_,*colMap_,0) ); 

  ExtImporter_ = rcp( new Epetra_Import(*ExtMap_,A().RowMatrixRowMap()) ); 
  ExtMatrix_->Import(A(),*ExtImporter_,Insert); 

  //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
  t1 = MPI_Wtime();
  fprintf(stderr,"[node %d]: time to import and setup ExtMap_ %2.3e\n", subdomainID, t1-t0);
  t0=t1;
#endif
  //FIXME timing


/*
  Notes to self:    In FillComplete, the range map does not have to be 1-1 as long as
                    (row map == range map).  Ditto for the domain map not being 1-1
                    if (col map == domain map).
                    
*/

  ExtMatrix_->FillComplete( *colMap_ , *Map_ ); //FIXME wrong

  //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
  t1 = MPI_Wtime();
  fprintf(stderr,"[node %d]: time to FillComplete B() %2.3e\n", subdomainID, t1-t0);
  t0=t1;
#endif
  //FIXME timing


  // Note: B() = *ExtMatrix_ .

  Importer_ = rcp( new Epetra_Import(*Map_,A().RowMatrixRowMap()) ); //FIXME is this right?!

  // fix indices for overlapping matrix
  NumMyRowsB_ = B().NumMyRows();
  NumMyRows_ = NumMyRowsA_ + NumMyRowsB_;  //TODO is this wrong for a subdomain on >1 processor? // should be ok
  //NumMyCols_ = NumMyRows_;  //TODO is this wrong for a subdomain on >1 processor?  // YES!!!
  //NumMyCols_ = A().NumMyCols() + B().NumMyCols();
  NumMyCols_ = B().NumMyCols();

  /*FIXME*/ //somehow B's NumMyCols is the entire subdomain (local + overlap)

  NumMyDiagonals_ = A().NumMyDiagonals() + B().NumMyDiagonals();
  
  NumMyNonzeros_ = A().NumMyNonzeros() + B().NumMyNonzeros();
  long long NumMyNonZerosTemp = NumMyNonzeros_;
  Comm().SumAll(&NumMyNonZerosTemp,&NumGlobalNonzeros_,1);
  MaxNumEntries_ = A().MaxNumEntries();
  
  if (MaxNumEntries_ < B().MaxNumEntries())
    MaxNumEntries_ = B().MaxNumEntries();

# ifdef HAVE_MPI
  delete nodeComm;
# endif

  //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
  t1 = MPI_Wtime();
  fprintf(stderr,"[node %d]: time for final calcs %2.3e\n", subdomainID, t1-t0);
  fprintf(stderr,"[node %d]: total IORM ctor time %2.3e\n", subdomainID, t1-true_t0);
#endif
  //FIXME timing


} //Ifpack_OverlappingRowMatrix() ctor for more than one core

#else
# ifdef IFPACK_NODE_AWARE_CODE

// ====================================================================== 
// Constructor for the case of two or more cores per subdomain
Ifpack_OverlappingRowMatrix::
Ifpack_OverlappingRowMatrix(const RCP<const Epetra_RowMatrix>& Matrix_in,
                            int OverlapLevel_in, int nodeID)  :
  Matrix_(Matrix_in),
  OverlapLevel_(OverlapLevel_in)
{

  //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
  double t0 = MPI_Wtime();
  double t1, true_t0=t0;
#endif
  //FIXME timing

  const int votesMax = INT_MAX;

  // should not be here if no overlap
  if (OverlapLevel_in == 0)
    IFPACK_CHK_ERRV(-1);

  // nothing to do as well with one process
  if (Comm().NumProc() == 1)
    IFPACK_CHK_ERRV(-1);

  // nodeID is the node (aka socket) number, and so is system dependent
  // nodeComm is the communicator for all the processes on a particular node
  // these processes will have the same nodeID.
# ifdef HAVE_MPI
  const Epetra_MpiComm *pComm = dynamic_cast<const Epetra_MpiComm*>( &Comm() );
  assert(pComm != NULL);
  MPI_Comm nodeMPIComm;
  MPI_Comm_split(pComm->Comm(),nodeID,pComm->MyPID(),&nodeMPIComm);
  Epetra_MpiComm *nodeComm = new Epetra_MpiComm(nodeMPIComm);
# else
  Epetra_SerialComm *nodeComm =  dynamic_cast<Epetra_MpiComm*>( &(Matrix_in->RowMatrixRowMap().Comm()) );
# endif
  
  NumMyRowsA_ = A().NumMyRows();

  RCP<Epetra_Map> TmpMap;
  RCP<Epetra_CrsMatrix> TmpMatrix; 
  RCP<Epetra_Import> TmpImporter;

  // importing rows corresponding to elements that are 
  // in ColMap, but not in RowMap 
  const Epetra_Map *RowMap; 
  const Epetra_Map *ColMap; 
  const Epetra_Map *DomainMap;

  // TODO Count #connections from nodes I own to each ghost node


  //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
  t1 = MPI_Wtime(); 
  fprintf(stderr,"[node %d]: time for initialization %2.3e\n", nodeID, t1-t0);
  t0=t1;
#endif
  //FIXME timing

#ifdef IFPACK_OVA_TIME_BUILD
  t1 = MPI_Wtime();
  fprintf(stderr,"[node %d]: overlap hash table allocs %2.3e\n", nodeID, t1-t0);
  t0=t1;
#endif

  Teuchos::Hashtable<int,int> colMapTable(3 * A().RowMatrixColMap().NumMyElements() );

  // ghostTable holds off-node GIDs that are connected to on-node rows and can potentially be this PID's overlap
  // TODO hopefully 3 times the # column entries is a reasonable table size
  Teuchos::Hashtable<int,int> ghostTable(3 * A().RowMatrixColMap().NumMyElements() );

  /* ** ************************************************************************** ** */
  /* ** ********************** start of main overlap loop ************************ ** */
  /* ** ************************************************************************** ** */
  for (int overlap = 0 ; overlap < OverlapLevel_in ; ++overlap)
  {
    // nbTable holds node buddy GIDs that are connected to current PID's rows, i.e., GIDs that should be in the overlapped
    // matrix's column map

    if (TmpMatrix != Teuchos::null) {
      RowMap = &(TmpMatrix->RowMatrixRowMap()); 
      ColMap = &(TmpMatrix->RowMatrixColMap()); 
      DomainMap = &(TmpMatrix->OperatorDomainMap());
    }
    else {
      RowMap = &(A().RowMatrixRowMap()); 
      ColMap = &(A().RowMatrixColMap()); 
      DomainMap = &(A().OperatorDomainMap());
    }

#ifdef IFPACK_OVA_TIME_BUILD
    t1 = MPI_Wtime();
    fprintf(stderr,"[node %d]: overlap pointer pulls %2.3e\n", nodeID, t1-t0);
    t0=t1;
#endif
    
    // For each column ID, determine the owning node (as opposed to core)
    // ID of the corresponding row.
    Epetra_IntVector colIdList( *ColMap );
    Epetra_IntVector rowIdList(*DomainMap);
    rowIdList.PutValue(nodeID);  
    Teuchos::RCP<Epetra_Import> nodeIdImporter = rcp(new Epetra_Import( *ColMap, *DomainMap ));

#ifdef IFPACK_OVA_TIME_BUILD
    t1 = MPI_Wtime();
    fprintf(stderr,"[node %d]: overlap intvector/importer allocs %2.3e\n", nodeID, t1-t0);
    t0=t1;
#endif
    
    colIdList.Import(rowIdList,*nodeIdImporter,Insert);
    
    int size = ColMap->NumMyElements() - RowMap->NumMyElements(); 
    int count = 0; 

#ifdef IFPACK_OVA_TIME_BUILD
    t1 = MPI_Wtime();
    fprintf(stderr,"[node %d]: overlap col/row ID imports %2.3e\n", nodeID, t1-t0);
    t0=t1;
#endif

    
    // define the set of off-node rows that are in ColMap but not in RowMap
    // This naturally does not include off-core rows that are on the same node as me, i.e., node buddy rows.
    for (int i = 0 ; i < ColMap->NumMyElements() ; ++i) {
      int GID = ColMap->GID(i); 
      int myvotes=0;
      if (ghostTable.containsKey(GID)) myvotes = ghostTable.get(GID);
      if ( colIdList[i] != nodeID && myvotes < votesMax) // don't include anybody found in a previous round
      {
        int votes;
        if (ghostTable.containsKey(GID)) {
          votes = ghostTable.get(GID);
          votes++;
          ghostTable.put(GID,votes);
        } else {
          ghostTable.put(GID,1);
        }
      }
    } //for (int i = 0 ; i < ColMap->NumMyElements() ; ++i)

    Teuchos::Array<int> gidsarray,votesarray;
    ghostTable.arrayify(gidsarray,votesarray);
    int *gids = gidsarray.getRawPtr();
    int *votes = votesarray.getRawPtr();

    /*
       This next bit of code decides which node buddy (NB) gets which ghost points.  Everyone sends their
       list of ghost points to pid 0 of the local subcommunicator.  Pid 0 decides who gets what:

          - if a ghost point is touched by only one NB, that NB gets the ghost point
          - if two or more NBs share a ghost point, whichever NB has the most connections to the ghost
            point gets it.
    */

#   ifdef HAVE_MPI  //FIXME What if we build in serial?!  This file will likely not compile.
    int *cullList;
    int ncull;
    //int mypid = nodeComm->MyPID();

    //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
    t1 = MPI_Wtime();
    fprintf(stderr,"[node %d]: overlap before culling %2.3e\n", nodeID, t1-t0);
    t0=t1;
#endif
    //FIXME timing


    if (nodeComm->MyPID() == 0)
    {
      // Figure out how much pid 0 is to receive
      MPI_Status status;
      int *lengths = new int[nodeComm->NumProc()+1];
      lengths[0] = 0;
      lengths[1] = ghostTable.size();
      for (int i=1; i<nodeComm->NumProc(); i++) {
        int leng;
        MPI_Recv( &leng, 1, MPI_INT, i, MPI_ANY_TAG, nodeComm->Comm(), &status);
        lengths[i+1] = lengths[i] + leng;
      }
      int total = lengths[nodeComm->NumProc()];

      int* ghosts = new int[total];
      for (int i=0; i<total; i++) ghosts[i] = -9;
      int *round  = new int[total];
      int *owningpid  = new int[total];

      for (int i=1; i<nodeComm->NumProc(); i++) {
        int count = lengths[i+1] - lengths[i];
        MPI_Recv( ghosts+lengths[i], count, MPI_INT, i, MPI_ANY_TAG, nodeComm->Comm(), &status);
        MPI_Recv( round+lengths[i], count, MPI_INT, i, MPI_ANY_TAG, nodeComm->Comm(), &status);
      }

      // put in pid 0's info
      for (int i=0; i<lengths[1]; i++) {
        ghosts[i] = gids[i];
        round[i] = votes[i];
        owningpid[i] = 0;
      }

      // put in the pid associated with each ghost
      for (int j=1; j<nodeComm->NumProc(); j++) {
        for (int i=lengths[j]; i<lengths[j+1]; i++) {
          owningpid[i] = j;
        }
      }

      // sort everything based on the ghost gids
      int* roundpid[2];
      roundpid[0] = round; roundpid[1] = owningpid;
      Epetra_Util epetraUtil;
      epetraUtil.Sort(true,total,ghosts,0,0,2,roundpid);

      //set up arrays that get sent back to node buddies and that tell them what ghosts to cull
      int *nlosers = new int[nodeComm->NumProc()];
      int** losers = new int*[nodeComm->NumProc()];
      for (int i=0; i<nodeComm->NumProc(); i++) {
        nlosers[i] = 0;
        losers[i] = new int[ lengths[i+1]-lengths[i] ];
      }

      // Walk through ghosts array and and for each sequence of duplicate ghost GIDs, choose just one NB to keep it.
      // The logic is pretty simple.  The ghost list is sorted, so all duplicate PIDs are together.
      // The list is traversed.  As duplicates are found, node pid 0 keeps track of the current "winning"
      // pid.  When a pid is determined to have "lost" (less votes/connections to the current GID), the
      // GID is added to that pid's list of GIDs to be culled.  At the end of the repeated sequence, we have
      // a winner, and other NBs know whether they need to delete it from their import list.
      int max=0;   //for duplicated ghosts, index of pid with most votes and who hence keeps the ghost.
                   // TODO to break ties randomly

      for (int i=1; i<total; i++) {
        if (ghosts[i] == ghosts[i-1]) {
          int idx = i; // pid associated with idx is current "loser"
          if (round[i] > round[max]) {
            idx = max;
            max=i;
          }
          int j = owningpid[idx];
          losers[j][nlosers[j]++] = ghosts[idx];
        } else {
          max=i;
        }
      } //for (int i=1; i<total; i++)

      delete [] round;
      delete [] ghosts;
      delete [] owningpid;

      // send the arrays of ghost GIDs to be culled back to the respective node buddies
      for (int i=1; i<nodeComm->NumProc(); i++) {
        MPI_Send( nlosers+i, 1, MPI_INT, i, 8675, nodeComm->Comm());
        MPI_Send( losers[i], nlosers[i], MPI_INT, i, 8675, nodeComm->Comm());
      }

      //FIXME Unnecessary memory allocation and copying, but makes culling code cleaner
      //Could we stick this info into gids and votes, since neither is being used anymore?
      //TODO Instead of using "losers" arrays, just use "cullList" as in the else clause
      ncull = nlosers[0];
      cullList = new int[ncull+1];
      for (int i=0; i<nlosers[0]; i++)
        cullList[i] = losers[0][i];

      for (int i=0; i<nodeComm->NumProc(); i++)
        delete [] losers[i];

      delete [] lengths;
      delete [] losers;
      delete [] nlosers;

    } else { //everyone but pid 0

      // send to node pid 0 all ghosts that this pid could potentially import
      int hashsize = ghostTable.size();
      MPI_Send( &hashsize, 1, MPI_INT, 0, 8675, nodeComm->Comm());
      MPI_Send( gids, hashsize, MPI_INT, 0, 8675, nodeComm->Comm());
      MPI_Send( votes, hashsize, MPI_INT, 0, 8675, nodeComm->Comm());

      // receive the ghost GIDs that should not be imported (subset of the list sent off just above)
      MPI_Status status;
      MPI_Recv( &ncull, 1, MPI_INT, 0, 8675, nodeComm->Comm(), &status);
      cullList = new int[ncull+1];
      MPI_Recv( cullList, ncull, MPI_INT, 0, 8675, nodeComm->Comm(), &status);
    }


    //TODO clean out hash table after each time through overlap loop   4/1/07 JJH done moved both hash tables to local scope

    // Remove from my row map all off-node ghosts that will be imported by a node buddy.
    for (int i=0; i<ncull; i++) {
      try{ghostTable.remove(cullList[i]);}

      catch(...) {
        printf("pid %d: In OverlappingRowMatrix ctr, problem removing ghost elt %d from ghostTable\n",
               Comm().MyPID(),cullList[i]);
        fflush(stdout);
      }
    }//for

    delete [] cullList;

    // Save off the remaining ghost GIDs from the current overlap round.
    // These are off-node GIDs (rows) that I will import.
    gidsarray.clear(); votesarray.clear();
    ghostTable.arrayify(gidsarray,votesarray);

    std::vector<int> list(size); 
    count=0;
    for (int i=0; i<ghostTable.size(); i++) {
      // if votesarray[i] == votesmax, then this GID was found during a previous overlap round
      if (votesarray[i] < votesMax) {
        list[count] = gidsarray[i];
        ghostTable.put(gidsarray[i],votesMax); //set this GID's vote to the maximum so that this PID alway wins in any subsequent overlap tiebreaking.
        count++;
      }
    }

    //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
    t1 = MPI_Wtime();
    fprintf(stderr,"[node %d]: overlap duplicate removal %2.3e\n", nodeID, t1-t0);
    t0=t1;
#endif
    //FIXME timing

#   endif //ifdef HAVE_MPI

    TmpMap = rcp( new Epetra_Map(-1,count, &list[0],0,Comm()) );

    TmpMatrix = rcp( new Epetra_CrsMatrix(Copy,*TmpMap,0) ); 

    TmpImporter = rcp( new Epetra_Import(*TmpMap,A().RowMatrixRowMap()) ); 

    TmpMatrix->Import(A(),*TmpImporter,Insert); 
    TmpMatrix->FillComplete(A().OperatorDomainMap(),*TmpMap); 

    //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
    t1 = MPI_Wtime();
    fprintf(stderr,"[node %d]: overlap TmpMatrix fillcomplete %2.3e\n", nodeID, t1-t0);
    t0=t1;
#endif
    //FIXME timing


    // These next two imports get the GIDs that need to go into the column map of the overlapped matrix.

    // For each column ID in the overlap, determine the owning node (as opposed to core)
    // ID of the corresponding row.  Save those column IDs whose owning node is the current one.
    // This should get all the imported ghost GIDs.
    Epetra_IntVector ov_colIdList( TmpMatrix->ColMap() );
    ov_colIdList.PutValue(-1);
    Epetra_IntVector ov_rowIdList( TmpMatrix->RowMap() );
    ov_rowIdList.PutValue(nodeID);  
    Teuchos::RCP<Epetra_Import> ov_nodeIdImporter = rcp(new Epetra_Import( TmpMatrix->ColMap(), TmpMatrix->RowMap()));
    ov_colIdList.Import(ov_rowIdList,*ov_nodeIdImporter,Insert);

    for (int i=0 ; i<ov_colIdList.MyLength(); i++) {
       if (ov_colIdList[i] == nodeID) {
         int GID = (ov_colIdList.Map()).GID(i);
         colMapTable.put(GID,1);
       }
    }

    // Do a second import of the owning node ID from A's rowmap to TmpMat's column map.  This ensures that
    // all GIDs that belong to a node buddy and are in a ghost row's sparsity pattern will be in the final
    // overlapped matrix's column map.
    ov_colIdList.PutValue(-1);
    Epetra_IntVector ArowIdList( A().RowMatrixRowMap() );
    ArowIdList.PutValue(nodeID);
    nodeIdImporter = rcp(new Epetra_Import( TmpMatrix->ColMap(), A().RowMatrixRowMap() ));
    ov_colIdList.Import(ArowIdList,*nodeIdImporter,Insert);

    for (int i=0 ; i<ov_colIdList.MyLength(); i++) {
       if (ov_colIdList[i] == nodeID) {
         int GID = (ov_colIdList.Map()).GID(i);
         colMapTable.put(GID,1);
       }
    }

    //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
    t1 = MPI_Wtime();
    fprintf(stderr,"[node %d]: overlap 2 imports to fix up colmap %2.3e\n", nodeID, t1-t0);
    t0=t1;
#endif
    //FIXME timing

  } //for (int overlap = 0 ; overlap < OverlapLevel_in ; ++overlap)

  /* ** ************************************************************************ ** */
  /* ** ********************** end of main overlap loop ************************ ** */
  /* ** ************************************************************************ ** */

  // off-node GIDs that will be in the overlap
  std::vector<int> ghostElements; 

  Teuchos::Array<int> gidsarray,votesarray;
  ghostTable.arrayify(gidsarray,votesarray);
  for (int i=0; i<ghostTable.size(); i++) {
    ghostElements.push_back(gidsarray[i]);
  }

    for (int i = 0 ; i < A().RowMatrixColMap().NumMyElements() ; ++i) {
      int GID = A().RowMatrixColMap().GID(i);
      // Remove any entries that are in A's original column map
      if (colMapTable.containsKey(GID)) {
        try{colMapTable.remove(GID);}
        catch(...) {
          printf("pid %d: In OverlappingRowMatrix ctr, problem removing entry %d from colMapTable\n", Comm().MyPID(),GID);
          fflush(stdout);
        }
      }
    }

    // GIDs that will be in the overlapped matrix's column map
    std::vector<int> colMapElements; 

  gidsarray.clear(); votesarray.clear();
  colMapTable.arrayify(gidsarray,votesarray);
  for (int i=0; i<colMapTable.size(); i++)
    colMapElements.push_back(gidsarray[i]);

/*
   We need two maps here.  The first is the row map, which we've got by using my original rows
   plus whatever I've picked up in ghostElements.

   The second is a column map.  This map should include my rows, plus any columns that could come from node buddies.
   These GIDs come from the std:array colMapElements, which in turn comes from colMapTable.
   This map should *not* omit ghosts that have been imported by my node buddies, i.e., for any row that I own,
   the stencil should include all column GIDs (including imported ghosts) that are on the node.
*/

  // build the row map containing all the nodes (original matrix + off-node matrix)
  std::vector<int> rowList(NumMyRowsA_ + ghostElements.size());
  for (int i = 0 ; i < NumMyRowsA_ ; ++i)
    rowList[i] = A().RowMatrixRowMap().GID(i);
  for (int i = 0 ; i < (int)ghostElements.size() ; ++i)
    rowList[i + NumMyRowsA_] = ghostElements[i];

  // row map for the overlapped matrix (local + overlap)
  Map_ = rcp( new Epetra_Map(-1, NumMyRowsA_ + ghostElements.size(), &rowList[0], 0, Comm()) );

  // build the column map for the overlapping matrix
  //vector<int> colList(colMapElements.size());
  // column map for the overlapped matrix (local + overlap)
  //colMap_ = rcp( new Epetra_Map(-1, colMapElements.size(), &colList[0], 0, Comm()) );
  //for (int i = 0 ; i < (int)colMapElements.size() ; i++)
  //  colList[i] = colMapElements[i];
  std::vector<int> colList(A().RowMatrixColMap().NumMyElements() + colMapElements.size());
  int nc = A().RowMatrixColMap().NumMyElements();
  for (int i = 0 ; i < nc; i++)
    colList[i] = A().RowMatrixColMap().GID(i);
  for (int i = 0 ; i < (int)colMapElements.size() ; i++)
    colList[nc+i] = colMapElements[i];

  // column map for the overlapped matrix (local + overlap)
  //colMap_ = rcp( new Epetra_Map(-1, A().RowMatrixColMap().NumMyElements() + colMapElements.size(), &colList[0], 0, Comm()) );
  colMap_ = new Epetra_Map(-1, A().RowMatrixColMap().NumMyElements() + colMapElements.size(), &colList[0], 0, Comm());
    

  //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
  t1 = MPI_Wtime();
  fprintf(stderr,"[node %d]: time to init B() col/row maps %2.3e\n", nodeID, t1-t0);
  t0=t1;
#endif
  //FIXME timing

  //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  //++++ start of sort
  //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  // build the column map, but don't use a copy constructor, b/c local communicator SubComm_ is
  // different from that of Matrix.
  try {
    // build row map based on the local communicator.  We need this temporarily to build the column map.
    Epetra_Map* nodeMap = new Epetra_Map(-1,NumMyRowsA_ + ghostElements.size(),&rowList[0],0,*nodeComm);
    int numMyElts = colMap_->NumMyElements();
    assert(numMyElts!=0);

    // The column map *must* be sorted: first locals, then ghosts.  The ghosts
    // must be further sorted so that they are contiguous by owning processor.

    // For each GID in column map, determine owning PID in local communicator.
    int* myGlobalElts = new int[numMyElts];
    colMap_->MyGlobalElements(myGlobalElts);
    int* pidList = new int[numMyElts];
    nodeMap->RemoteIDList(numMyElts, myGlobalElts, pidList, 0);

    // First sort column map GIDs based on the owning PID in local communicator.
    Epetra_Util Util;
    int *tt[1];
    tt[0] = myGlobalElts;
    Util.Sort(true, numMyElts, pidList, 0, (double**)0, 1, tt);

    // For each remote PID, sort the column map GIDs in ascending order.
    // Don't sort the local PID's entries.
    int localStart=0;
    while (localStart<numMyElts) {
      int currPID = (pidList)[localStart];
      int i=localStart;
      while (i<numMyElts && (pidList)[i] == currPID) i++;
      if (currPID != nodeComm->MyPID())
        Util.Sort(true, i-localStart, (myGlobalElts)+localStart, 0, 0, 0, 0);
      localStart = i;
    }

    // now move the local entries to the front of the list
    localStart=0;
    while (localStart<numMyElts && (pidList)[localStart] != nodeComm->MyPID()) localStart++;
    assert(localStart != numMyElts);
    int localEnd=localStart;
    while (localEnd<numMyElts && (pidList)[localEnd] == nodeComm->MyPID()) localEnd++;
    int* mySortedGlobalElts = new int[numMyElts];
    int leng = localEnd - localStart;
    /* This is a little gotcha.  It appears that the ordering of the column map's local entries
       must be the same as that of the domain map's local entries.  See the comment in method
       MakeColMap() in Epetra_CrsGraph.cpp, line 1072. */
    int *rowGlobalElts =  nodeMap->MyGlobalElements();

    /*TODO TODO TODO NTS rows 68 and 83 show up as local GIDs in rowGlobalElts for both pids 0 & 1 on node 0.
                    This seems to imply that there is something wrong with rowList!!
                    It is ok for the overlapped matrix's row map to have repeated entries (it's overlapped, after all).
                    But ... on a node, there should be no repeats.
                    Ok, here's the underlying cause.  On node 0, gpid 1 finds 83 on overlap round 0.  gpid 0 finds 83
                    on overlap round 1.  This shouldn't happen .. once a node buddy "owns" a row, no other node buddy
                    should ever import ("own") that row.

                    Here's a possible fix.  Extend tie breaking across overlap rounds.  This means sending to lpid 0
                    a list of *all* rows you've imported (this round plus previous rounds) for tie-breaking
                    If a nb won a ghost row in a previous round, his votes for that ghost row should be really high, i.e.,
                    he should probably win that ghost row forever.
                    7/17/09

      7/28/09 JJH I believe I've fixed this, but I thought it might be helpful to have this comment in here, in case I missed something.
    */

    //move locals to front of list
    for (int i=0; i<leng; i++) {
      /* //original code */
      (mySortedGlobalElts)[i] = rowGlobalElts[i];
      //(&*mySortedGlobalElts)[i] = (&*myGlobalElts)[localStart+i];
      //(&*mySortedPidList)[i] = (&*pidList)[localStart+i];
    }
    for (int i=leng; i< localEnd; i++) {
      (mySortedGlobalElts)[i] = (myGlobalElts)[i-leng];
    }
    for (int i=localEnd; i<numMyElts; i++) {
      (mySortedGlobalElts)[i] = (myGlobalElts)[i];
    }

    //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
    t1 = MPI_Wtime();
    fprintf(stderr,"[node %d]: time to sort col map arrays (cp=1) %2.3e\n", nodeID, t1-t0);
    t0=t1;
#endif
    //FIXME timing

    int indexBase = colMap_->IndexBase();
    if (colMap_) delete colMap_;
    colMap_ = new Epetra_Map(-1,numMyElts,mySortedGlobalElts,indexBase,Comm());

    delete nodeMap;
    delete [] myGlobalElts;
    delete [] pidList;
    delete [] mySortedGlobalElts;

  } //try
  catch(...) {
    printf("** * Ifpack_OverlappingRowmatrix ctor: problem creating column map * **\n\n");
  }

  //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  //++++ end of sort
  //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

  //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
  t1 = MPI_Wtime();
  fprintf(stderr,"[node %d]: time to sort col map arrays (cp=2) %2.3e\n", nodeID, t1-t0);
  t0=t1;
#endif
  //FIXME timing


/*

   FIXME
   Does the column map need to be sorted for the overlapping matrix?

   The column map *must* be sorted:

        first locals
        then ghosts

   The ghosts must be further sorted so that they are contiguous by owning processor

  int* RemoteSizeList = 0
  int* RemoteColIndices = ColIndices.Values() + NumLocalColGIDs; // Points to back end of ColIndices

  EPETRA_CHK_ERR(DomainMap.RemoteIDList(NumRemoteColGIDs, RemoteColIndices, PIDList.Values(), 0, RemoteSizeList));
  Epetra_Util epetraUtil;
  SortLists[0] = RemoteColIndices;
  SortLists[1] = RemoteSizeList;
  epetraUtil.Sort(true, NumRemoteColGIDs, PIDList.Values(), 0, 0, NLists, SortLists);
*/

  // now build the map corresponding to all the external nodes
  // (with respect to A().RowMatrixRowMap().
  ExtMap_ = rcp( new Epetra_Map(-1,ghostElements.size(), &ghostElements[0],0,Comm()) );
  ExtMatrix_ = rcp( new Epetra_CrsMatrix(Copy,*ExtMap_,*colMap_,0) ); 

  ExtImporter_ = rcp( new Epetra_Import(*ExtMap_,A().RowMatrixRowMap()) ); 
  ExtMatrix_->Import(A(),*ExtImporter_,Insert); 

  //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
  t1 = MPI_Wtime();
  fprintf(stderr,"[node %d]: time to import and setup ExtMap_ %2.3e\n", nodeID, t1-t0);
  t0=t1;
#endif
  //FIXME timing


/*
  Notes to self:    In FillComplete, the range map does not have to be 1-1 as long as
                    (row map == range map).  Ditto for the domain map not being 1-1
                    if (col map == domain map).
                    
*/

  ExtMatrix_->FillComplete( *colMap_ , *Map_ ); //FIXME wrong

  //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
  t1 = MPI_Wtime();
  fprintf(stderr,"[node %d]: time to FillComplete B() %2.3e\n", nodeID, t1-t0);
  t0=t1;
#endif
  //FIXME timing


  // Note: B() = *ExtMatrix_ .

  Importer_ = rcp( new Epetra_Import(*Map_,A().RowMatrixRowMap()) ); //FIXME is this right?!

  // fix indices for overlapping matrix
  NumMyRowsB_ = B().NumMyRows();
  NumMyRows_ = NumMyRowsA_ + NumMyRowsB_;  //TODO is this wrong for a subdomain on >1 processor? // should be ok
  //NumMyCols_ = NumMyRows_;  //TODO is this wrong for a subdomain on >1 processor?  // YES!!!
  //NumMyCols_ = A().NumMyCols() + B().NumMyCols();
  NumMyCols_ = B().NumMyCols();

  /*FIXME*/ //somehow B's NumMyCols is the entire subdomain (local + overlap)

  NumMyDiagonals_ = A().NumMyDiagonals() + B().NumMyDiagonals();
  
  NumMyNonzeros_ = A().NumMyNonzeros() + B().NumMyNonzeros();
  Comm().SumAll(&NumMyNonzeros_,&NumGlobalNonzeros_,1);
  MaxNumEntries_ = A().MaxNumEntries();
  
  if (MaxNumEntries_ < B().MaxNumEntries())
    MaxNumEntries_ = B().MaxNumEntries();

# ifdef HAVE_MPI
  delete nodeComm;
# endif

  //FIXME timing
#ifdef IFPACK_OVA_TIME_BUILD
  t1 = MPI_Wtime();
  fprintf(stderr,"[node %d]: time for final calcs %2.3e\n", nodeID, t1-t0);
  fprintf(stderr,"[node %d]: total IORM ctor time %2.3e\n", nodeID, t1-true_t0);
#endif
  //FIXME timing


} //Ifpack_OverlappingRowMatrix() ctor for more than one core

// Destructor
Ifpack_OverlappingRowMatrix::~Ifpack_OverlappingRowMatrix() {
  delete colMap_;
}

# endif //ifdef IFPACK_NODE_AWARE_CODE
#endif // ifdef HAVE_IFPACK_PARALLEL_SUBDOMAIN_SOLVERS


// ======================================================================
int Ifpack_OverlappingRowMatrix::
NumMyRowEntries(int MyRow, int & NumEntries) const
{
  if (MyRow < NumMyRowsA_)
    return(A().NumMyRowEntries(MyRow,NumEntries));
  else
    return(B().NumMyRowEntries(MyRow - NumMyRowsA_, NumEntries));
}

#ifdef HAVE_IFPACK_PARALLEL_SUBDOMAIN_SOLVERS
// ======================================================================
int Ifpack_OverlappingRowMatrix::
ExtractMyRowCopy(int LocRow, int Length, int & NumEntries, double *Values, 
                 int * Indices) const
{
  //assert(1==0);
  int ierr;
  const Epetra_Map *Themap;
  if (LocRow < NumMyRowsA_) {
    ierr = A().ExtractMyRowCopy(LocRow,Length,NumEntries,Values,Indices);
    Themap=&A().RowMatrixColMap();
  }
  else {
    ierr = B().ExtractMyRowCopy(LocRow-NumMyRowsA_,Length,NumEntries,Values,Indices);
    Themap=&B().RowMatrixColMap();
  }

  IFPACK_RETURN(ierr);
}

// ======================================================================
int Ifpack_OverlappingRowMatrix::
ExtractGlobalRowCopy(int GlobRow, int Length, int & NumEntries, double *Values, 
                 int * Indices) const
{
  int ierr;
  const Epetra_Map *Themap;
  int LocRow = A().RowMatrixRowMap().LID(GlobRow);
  if (LocRow < NumMyRowsA_ && LocRow != -1) { //TODO don't need to check less than nummyrows
    ierr = A().ExtractMyRowCopy(LocRow,Length,NumEntries,Values,Indices);
    Themap=&A().RowMatrixColMap();
  }
  else {
    LocRow = B().RowMatrixRowMap().LID(GlobRow);
    assert(LocRow!=-1);
    //ierr = B().ExtractMyRowCopy(LocRow-NumMyRowsA_,Length,NumEntries,Values,Indices);
    ierr = B().ExtractMyRowCopy(LocRow,Length,NumEntries,Values,Indices);
    Themap=&B().RowMatrixColMap();
  }

  for (int i=0; i<NumEntries; i++) {
    Indices[i]=Themap->GID(Indices[i]);
    assert(Indices[i] != -1);
  }

  IFPACK_RETURN(ierr);
}
#else
# ifdef IFPACK_NODE_AWARE_CODE
// ======================================================================
int Ifpack_OverlappingRowMatrix::
ExtractMyRowCopy(int LocRow, int Length, int & NumEntries, double *Values, 
                 int * Indices) const
{
  assert(1==0);
  int ierr;
  const Epetra_Map *Themap;
  if (LocRow < NumMyRowsA_) {
    ierr = A().ExtractMyRowCopy(LocRow,Length,NumEntries,Values,Indices);
    Themap=&A().RowMatrixColMap();
  }
  else {
    ierr = B().ExtractMyRowCopy(LocRow-NumMyRowsA_,Length,NumEntries,Values,Indices);
    Themap=&B().RowMatrixColMap();
  }

  IFPACK_RETURN(ierr);
}

// ======================================================================
int Ifpack_OverlappingRowMatrix::
ExtractGlobalRowCopy(int GlobRow, int Length, int & NumEntries, double *Values, 
                 int * Indices) const
{
  int ierr;
  const Epetra_Map *Themap;
  int LocRow = A().RowMatrixRowMap().LID(GlobRow);
  if (LocRow < NumMyRowsA_ && LocRow != -1) { //TODO don't need to check less than nummyrows
    ierr = A().ExtractMyRowCopy(LocRow,Length,NumEntries,Values,Indices);
    Themap=&A().RowMatrixColMap();
  }
  else {
    LocRow = B().RowMatrixRowMap().LID(GlobRow);
    assert(LocRow!=-1);
    //ierr = B().ExtractMyRowCopy(LocRow-NumMyRowsA_,Length,NumEntries,Values,Indices);
    ierr = B().ExtractMyRowCopy(LocRow,Length,NumEntries,Values,Indices);
    Themap=&B().RowMatrixColMap();
  }

  for (int i=0; i<NumEntries; i++) {
    Indices[i]=Themap->GID(Indices[i]);
    assert(Indices[i] != -1);
  }

  IFPACK_RETURN(ierr);
}
# else

// ======================================================================
int Ifpack_OverlappingRowMatrix::
ExtractMyRowCopy(int MyRow, int Length, int & NumEntries, double *Values,
                 int * Indices) const
{
  int ierr;
  if (MyRow < NumMyRowsA_)
    ierr = A().ExtractMyRowCopy(MyRow,Length,NumEntries,Values,Indices);
  else
    ierr = B().ExtractMyRowCopy(MyRow - NumMyRowsA_,Length,NumEntries,
                                Values,Indices);

  IFPACK_RETURN(ierr);
}
# endif // ifdef IFPACK_NODE_AWARE_CODE
#endif // ifdef HAVE_IFPACK_PARALLEL_SUBDOMAIN_SOLVERS

// ======================================================================
int Ifpack_OverlappingRowMatrix::
ExtractDiagonalCopy(Epetra_Vector & /* Diagonal */) const
{
  IFPACK_CHK_ERR(-1);
}


// ======================================================================
int Ifpack_OverlappingRowMatrix::
Multiply(bool /* TransA */, const Epetra_MultiVector& X, Epetra_MultiVector& Y) const
{
  int NumVectors = X.NumVectors();
  std::vector<int> Ind(MaxNumEntries_);
  std::vector<double> Val(MaxNumEntries_);

  Y.PutScalar(0.0);

  // matvec with A (local rows)
  for (int i = 0 ; i < NumMyRowsA_ ; ++i) {
    for (int k = 0 ; k < NumVectors ; ++k) {
      int Nnz;
      IFPACK_CHK_ERR(A().ExtractMyRowCopy(i,MaxNumEntries_,Nnz, 
                                          &Val[0], &Ind[0]));
      for (int j = 0 ; j < Nnz ; ++j) {
        Y[k][i] += Val[j] * X[k][Ind[j]];
      }
    }
  }

  // matvec with B (overlapping rows)
  for (int i = 0 ; i < NumMyRowsB_ ; ++i) {
    for (int k = 0 ; k < NumVectors ; ++k) {
      int Nnz;
      IFPACK_CHK_ERR(B().ExtractMyRowCopy(i,MaxNumEntries_,Nnz, 
                                          &Val[0], &Ind[0]));
      for (int j = 0 ; j < Nnz ; ++j) {
        Y[k][i + NumMyRowsA_] += Val[j] * X[k][Ind[j]];
      }
    }
  }
  return(0);
}

// ======================================================================
int Ifpack_OverlappingRowMatrix::
Apply(const Epetra_MultiVector& X, Epetra_MultiVector& Y) const
{
  IFPACK_CHK_ERR(Multiply(UseTranspose(),X,Y));
  return(0);
}

// ======================================================================
int Ifpack_OverlappingRowMatrix::
ApplyInverse(const Epetra_MultiVector& /* X */, Epetra_MultiVector& /* Y */) const
{
  IFPACK_CHK_ERR(-1);
}

// ======================================================================
#ifndef HAVE_IFPACK_PARALLEL_SUBDOMAIN_SOLVERS
# ifndef IFPACK_NODE_AWARE_CODE
Epetra_RowMatrix& Ifpack_OverlappingRowMatrix::B() const
{
  return(*ExtMatrix_);
}
# endif
#endif
// ======================================================================
const Epetra_BlockMap& Ifpack_OverlappingRowMatrix::Map() const
{
  return(*Map_);
}

// ======================================================================
int Ifpack_OverlappingRowMatrix::
ImportMultiVector(const Epetra_MultiVector& X, Epetra_MultiVector& OvX,
                  Epetra_CombineMode CM)
{
  OvX.Import(X,*Importer_,CM);
  return(0);
}

// ======================================================================
int Ifpack_OverlappingRowMatrix::
ExportMultiVector(const Epetra_MultiVector& OvX, Epetra_MultiVector& X,
                  Epetra_CombineMode CM)
{
  X.Export(OvX,*Importer_,CM);
  return(0);
}