Euclid_dh.h

Go to the documentation of this file.

/*@HEADER
// ***********************************************************************
//
//       Ifpack: Object-Oriented Algebraic Preconditioner Package
//                 Copyright (2002) Sandia Corporation
//
// Under terms of Contract DE-AC04-94AL85000, there is a non-exclusive
// license for use of this work by or on behalf of the U.S. Government.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// 1. Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// 3. Neither the name of the Corporation nor the names of the
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY SANDIA CORPORATION "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SANDIA CORPORATION OR THE
// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Questions? Contact Michael A. Heroux (maherou@sandia.gov)
//
// ***********************************************************************
//@HEADER
*/

#ifndef EUCLID_MPI_INTERFACE_DH
#define EUCLID_MPI_INTERFACE_DH

#if defined(Ifpack_SHOW_DEPRECATED_WARNINGS)
#ifdef __GNUC__
#warning "The Ifpack package is deprecated"
#endif
#endif

#define DEFAULT_DROP_TOL 0.01

#include "euclid_common.h"

/*======================================================================
 * Naming convention: functions ending in _mpi are located in
 * src/Euclid_mpi.c; those ending in _seq are in src/Euclid_seq.c;
 * most others should be in Euclid_all.c.
 *
 * Exceptions: all Apply() (triangular solves) are in src/Euclid_apply.c;
 *             except for the Apply for MPI PILU, which is called
 *             Mat_dhSolve, and is in src/Mat_dh.c
 *
 * Users should only need to call functions with names of the form
 * Euclid_dhXXX (public functions). 
 *
 * Some of the functions whose names are of the form XXX_private_XXX,
 * as could easily be static functions; similarly, the enums and
 * structs do need to be public.  They are, primarily, for ease in
 * debugging and ready reference.
 *
 * Exceptions: the apply_private functions aren't listed here --- they're
 * all static in src/Euclid_apply.c
 *======================================================================*/
#ifdef __cplusplus
extern "C"
{
#endif

  extern void Euclid_dhCreate (Euclid_dh * ctxOUT);
  extern void Euclid_dhDestroy (Euclid_dh ctx);
  extern void Euclid_dhSetup (Euclid_dh ctx);
  extern void Euclid_dhSolve (Euclid_dh ctx, Vec_dh lhs, Vec_dh rhs,
            int *its);
  extern void Euclid_dhApply (Euclid_dh ctx, double *lhs, double *rhs);

  extern void Euclid_dhPrintTestData (Euclid_dh ctx, FILE * fp);
  extern void Euclid_dhPrintScaling (Euclid_dh ctx, FILE * fp);

  extern void Euclid_dhPrintStatsShort (Euclid_dh ctx, double setup,
          double solve, FILE * fp);


  extern void Euclid_dhPrintStatsShorter (Euclid_dh ctx, FILE * fp);
  /* on-line reporting, for making quick tables */

  extern void Euclid_dhPrintHypreReport (Euclid_dh ctx, FILE * fp);

  extern void Euclid_dhPrintStats (Euclid_dh ctx, FILE * fp);
  /* prints same info as Euclid_dhPrintParams(), but also
     prints timing information, number of iterations, etc;
     may be called after solve is completed.
   */


/*----------------------------------------------------------------------
 * Private data structures
 *----------------------------------------------------------------------*/

#define MAX_OPT_LEN 20

/* for internal timing */
#define TIMING_BINS 10
  enum
  { SOLVE_START_T,
    TRI_SOLVE_T,    /* triangular solves */
    SETUP_T,      /* total setup */
    SUB_GRAPH_T,    /* setup SubdomainGraph_dh */
    FACTOR_T,     /* factorization */
    SOLVE_SETUP_T,    /* setup for solves */
    COMPUTE_RHO_T,
    /* note: SETUP_T - (FACTOR_T + SUB_GRAPH_T) should be small! */
    TOTAL_SOLVE_TEMP_T,
    TOTAL_SOLVE_T
  };

/* for statistical reporting */
#define STATS_BINS 10
  enum
  { NZA_STATS,      /* cumulative nonzeros for all systems solved */
    NZF_STATS,      /* cumulative nonzeros for all systems solved */
    NZA_USED_STATS,   /* cumulative nonzeros NOT dropped by sparseA */
    NZA_RATIO_STATS   /* NZA_USED_STATS/NZA_STATS, over all processors */
  };


/* primary data structure: this is monstrously long; but it works. 
   Users must ensure the following fields are initialized prior
   to calling Euclid_dhSetup(): m, n, beg_row, A
*/
  struct _mpi_interface_dh
  {
    bool isSetup;

    double rho_init;
    double rho_final;
    /* Memory allocation for factor; will initially allocate space for 
       rho_init*nzA nonzeros; rho_final is computed after factorization,
       and is the minimum that rho_init whoulc have been to avoid
       memory reallocation; rho_final is a maximum across all processors.
     */

    int m;      /* local rows in matrix */
    int n;      /* global rows in matrix */
    double *rhs;    /* used for debugging; this vector is not owned! */
    void *A;      /*  void-pointer to Epetra_CrsMatrix */
    Factor_dh F;    /* data structure for the factor, F = L+U-I */
    SubdomainGraph_dh sg;

    REAL_DH *scale;   /* row scaling vector */
    bool isScaled;    /* set at runtime, turns scaling on or off */

    /* workspace for factorization and triangular solves */
    double *work;
    double *work2;
    int from, to;   /* which local rows to factor or solve */

    /* runtime parameters (mostly) */
    char algo_par[MAX_OPT_LEN]; /* parallelization strategy */
    char algo_ilu[MAX_OPT_LEN]; /* ILU factorization method */
    int level;      /* for ILU(k) */
    double droptol;   /* for ILUT */
    double sparseTolA;    /* for sparsifying A */
    double sparseTolF;    /* for sparsifying the factors */
    double pivotMin;    /* if pivots are <= to this value, fix 'em */
    double pivotFix;    /* multiplier for adjusting small pivots */
    double maxVal;    /* largest abs. value in matrix */

    /* data structures for parallel ilu (pilu) */
    SortedList_dh slist;
    ExternalRows_dh extRows;

    /* for use with Euclid's internal krylov solvers; */
    char krylovMethod[MAX_OPT_LEN];
    int maxIts;
    double rtol;
    double atol;
    int its;      /* number of times preconditioner was applied since last call to Setup */
    int itsTotal;   /* cululative number of times preconditioner was applied */

    /* internal statistics */
    int setupCount;
    int logging;
    double timing[TIMING_BINS];
    double stats[STATS_BINS];
    bool timingsWereReduced;
    bool printStats;    /* if true, on 2nd and subsequent calls to Setup,
           calls Euclid_dhPrintStatsShorter().  Intent is to
           print out stats for each setup phase when 
           using Euclid, e.g, for nonlinear solves.
         */
  };

#ifdef __cplusplus
}
#endif
#endif        /*  #ifndef EUCLID_MPI_INTERFACE_DH */