Belos  Version of the Day
 All Classes Namespaces Files Functions Variables Typedefs Enumerations Enumerator Friends Macros Groups Pages
BlockGmres/PseudoBlockGmresEpetraExFile.cpp

This is an example of how to use the Belos::PseudoBlockGmresSolMgr solver manager.

//@HEADER
// ************************************************************************
//
// Belos: Block Linear Solvers Package
// Copyright 2004 Sandia Corporation
//
// Under the terms of Contract DE-AC04-94AL85000 with Sandia Corporation,
// the U.S. Government retains certain rights in this software.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// 1. Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// 3. Neither the name of the Corporation nor the names of the
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY SANDIA CORPORATION "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SANDIA CORPORATION OR THE
// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Questions? Contact Michael A. Heroux (maherou@sandia.gov)
//
// ************************************************************************
//@HEADER
//
// This driver reads a problem from a file, which can be in Harwell-Boeing (*.hb),
// Matrix Market (*.mtx), or triplet format (*.triU, *.triS). The right-hand side
// from the problem, if it exists, will be used instead of multiple
// random right-hand-sides. The initial guesses are all set to zero.
//
// NOTE: No preconditioner is used in this example.
//
#include "BelosEpetraAdapter.hpp"
#include "EpetraExt_readEpetraLinearSystem.h"
#include "Epetra_Map.h"
#ifdef EPETRA_MPI
#include "Epetra_MpiComm.h"
#else
#include "Epetra_SerialComm.h"
#endif
#include "Epetra_CrsMatrix.h"
#include "Teuchos_StandardCatchMacros.hpp"
int main(int argc, char *argv[]) {
//
int MyPID = 0;
#ifdef EPETRA_MPI
// Initialize MPI
MPI_Init(&argc,&argv);
Epetra_MpiComm Comm(MPI_COMM_WORLD);
MyPID = Comm.MyPID();
#else
#endif
//
typedef double ST;
typedef SCT::magnitudeType MT;
typedef Epetra_MultiVector MV;
typedef Epetra_Operator OP;
using Teuchos::RCP;
using Teuchos::rcp;
bool verbose = false;
bool success = true;
try {
bool proc_verbose = false;
int frequency = -1; // frequency of status test output.
int blocksize = 1; // blocksize
int numrhs = 1; // number of right-hand sides to solve for
int maxiters = -1; // maximum number of iterations allowed per linear system
int maxsubspace = 50; // maximum number of blocks the solver can use for the subspace
int maxrestarts = 15; // number of restarts allowed
std::string filename("orsirr1.hb");
MT tol = 1.0e-5; // relative residual tolerance
cmdp.setOption("verbose","quiet",&verbose,"Print messages and results.");
cmdp.setOption("frequency",&frequency,"Solvers frequency for printing residuals (#iters).");
cmdp.setOption("filename",&filename,"Filename for test matrix. Acceptable file extensions: *.hb,*.mtx,*.triU,*.triS");
cmdp.setOption("tol",&tol,"Relative residual tolerance used by GMRES solver.");
cmdp.setOption("num-rhs",&numrhs,"Number of right-hand sides to be solved for.");
cmdp.setOption("block-size",&blocksize,"Block size used by GMRES.");
cmdp.setOption("max-iters",&maxiters,"Maximum number of iterations per linear system (-1 = adapted to problem/block size).");
cmdp.setOption("max-subspace",&maxsubspace,"Maximum number of blocks the solver can use for the subspace.");
cmdp.setOption("max-restarts",&maxrestarts,"Maximum number of restarts allowed for GMRES solver.");
return -1;
}
if (!verbose)
frequency = -1; // reset frequency if test is not verbose
//
// Get the problem
//
RCP<Epetra_Map> Map;
RCP<Epetra_CrsMatrix> A;
RCP<Epetra_MultiVector> B, X;
RCP<Epetra_Vector> vecB, vecX;
EpetraExt::readEpetraLinearSystem(filename, Comm, &A, &Map, &vecX, &vecB);
A->OptimizeStorage();
proc_verbose = verbose && (MyPID==0); /* Only print on the zero processor */
// Check to see if the number of right-hand sides is the same as requested.
if (numrhs>1) {
X = rcp( new Epetra_MultiVector( *Map, numrhs ) );
B = rcp( new Epetra_MultiVector( *Map, numrhs ) );
X->Random();
OPT::Apply( *A, *X, *B );
X->PutScalar( 0.0 );
}
else {
X = Teuchos::rcp_implicit_cast<Epetra_MultiVector>(vecX);
B = Teuchos::rcp_implicit_cast<Epetra_MultiVector>(vecB);
}
//
// ********Other information used by block solver***********
// *****************(can be user specified)******************
//
const int NumGlobalElements = B->GlobalLength();
if (maxiters == -1)
maxiters = NumGlobalElements - 1; // maximum number of iterations to run
//
ParameterList belosList;
belosList.set( "Num Blocks", maxsubspace); // Maximum number of blocks in Krylov factorization
belosList.set( "Block Size", blocksize ); // Blocksize to be used by iterative solver
belosList.set( "Maximum Iterations", maxiters ); // Maximum number of iterations allowed
belosList.set( "Maximum Restarts", maxrestarts ); // Maximum number of restarts allowed
belosList.set( "Convergence Tolerance", tol ); // Relative convergence tolerance requested
if (verbose) {
belosList.set( "Verbosity", Belos::Errors + Belos::Warnings +
if (frequency > 0)
belosList.set( "Output Frequency", frequency );
}
else
belosList.set( "Verbosity", Belos::Errors + Belos::Warnings );
//
// Construct an unpreconditioned linear problem instance.
//
bool set = problem.setProblem();
if (set == false) {
if (proc_verbose)
std::cout << std::endl << "ERROR: Belos::LinearProblem failed to set up correctly!" << std::endl;
return -1;
}
//
// *******************************************************************
// *************Start the block Gmres iteration*************************
// *******************************************************************
//
// Create an iterative solver manager.
RCP< Belos::SolverManager<double,MV,OP> > newSolver
= rcp( new Belos::PseudoBlockGmresSolMgr<double,MV,OP>(rcp(&problem,false), rcp(&belosList,false)) );
//
// **********Print out information about problem*******************
//
if (proc_verbose) {
std::cout << std::endl << std::endl;
std::cout << "Dimension of matrix: " << NumGlobalElements << std::endl;
std::cout << "Number of right-hand sides: " << numrhs << std::endl;
std::cout << "Block size used by solver: " << blocksize << std::endl;
std::cout << "Max number of restarts allowed: " << maxrestarts << std::endl;
std::cout << "Max number of Gmres iterations per restart cycle: " << maxiters << std::endl;
std::cout << "Relative residual tolerance: " << tol << std::endl;
std::cout << std::endl;
}
//
// Perform solve
//
Belos::ReturnType ret = newSolver->solve();
//
// Compute actual residuals.
//
bool badRes = false;
std::vector<double> actual_resids( numrhs );
std::vector<double> rhs_norm( numrhs );
Epetra_MultiVector resid(*Map, numrhs);
OPT::Apply( *A, *X, resid );
MVT::MvAddMv( -1.0, resid, 1.0, *B, resid );
MVT::MvNorm( resid, actual_resids );
MVT::MvNorm( *B, rhs_norm );
if (proc_verbose) {
std::cout<< "---------- Actual Residuals (normalized) ----------"<<std::endl<<std::endl;
for ( int i=0; i<numrhs; i++) {
double actRes = actual_resids[i]/rhs_norm[i];
std::cout<<"Problem "<<i<<" : \t"<< actRes <<std::endl;
if (actRes > tol) badRes = true;
}
}
if (ret!=Belos::Converged || badRes) {
success = false;
if (proc_verbose)
std::cout << std::endl << "ERROR: Belos did not converge!" << std::endl;
} else {
success = true;
if (proc_verbose)
std::cout << std::endl << "SUCCESS: Belos converged!" << std::endl;
}
}
TEUCHOS_STANDARD_CATCH_STATEMENTS(verbose, std::cerr, success);
#ifdef EPETRA_MPI
MPI_Finalize();
#endif
return success ? EXIT_SUCCESS : EXIT_FAILURE;
}

Generated on Thu Mar 28 2024 09:27:40 for Belos by doxygen 1.8.5