Anasazi  Version of the Day
 All Classes Namespaces Files Functions Variables Typedefs Enumerations Enumerator Friends Groups Pages
LOBPCGEpetraExSimple.cpp

Use "Simple LOBPCG" with Epetra test problem (computed here).This example computes the eigenvalues of largest magnitude of an eigenvalue problem $A x = x$, using Anasazi's "simple" implementation of the LOBPCG method, with Epetra linear algebra. It constructs the test problem within the example itself.

// @HEADER
// ***********************************************************************
//
// Anasazi: Block Eigensolvers Package
// Copyright 2004 Sandia Corporation
//
// Under terms of Contract DE-AC04-94AL85000 with Sandia Corporation,
// the U.S. Government retains certain rights in this software.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// 1. Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// 3. Neither the name of the Corporation nor the names of the
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY SANDIA CORPORATION "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SANDIA CORPORATION OR THE
// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Questions? Contact Michael A. Heroux (maherou@sandia.gov)
//
// ***********************************************************************
// @HEADER
#include "Epetra_CrsMatrix.h"
#include "Teuchos_Assert.hpp"
#ifdef HAVE_MPI
#include "Epetra_MpiComm.h"
#include <mpi.h>
#else
#include "Epetra_SerialComm.h"
#endif
#include "Epetra_Map.h"
int
main (int argc, char *argv[])
{
using namespace Anasazi;
using Teuchos::RCP;
using Teuchos::rcp;
using std::endl;
#ifdef HAVE_MPI
// Initialize MPI
MPI_Init (&argc, &argv);
#endif // HAVE_MPI
// Create an Epetra communicator
#ifdef HAVE_MPI
Epetra_MpiComm Comm (MPI_COMM_WORLD);
#else
#endif // HAVE_MPI
// Create an Anasazi output manager
printer.stream(Errors) << Anasazi_Version() << std::endl << std::endl;
// Get the sorting std::string from the command line
std::string which ("SM");
Teuchos::CommandLineProcessor cmdp (false, true);
cmdp.setOption("sort",&which,"Targetted eigenvalues (SM or LM).");
#ifdef HAVE_MPI
MPI_Finalize ();
#endif // HAVE_MPI
return -1;
}
// Dimension of the matrix
//
// Discretization points in any one direction.
const int nx = 10;
// Size of matrix nx*nx
const int NumGlobalElements = nx*nx;
// Construct a Map that puts approximately the same number of
// equations on each process.
Epetra_Map Map (NumGlobalElements, 0, Comm);
// Get update list and number of local equations from newly created Map.
int NumMyElements = Map.NumMyElements ();
std::vector<int> MyGlobalElements (NumMyElements);
Map.MyGlobalElements (&MyGlobalElements[0]);
// Create an integer vector NumNz that is used to build the Petra
// matrix. NumNz[i] is the number of OFF-DIAGONAL terms for the ith
// global equation on this process.
std::vector<int> NumNz(NumMyElements);
/* We are building a matrix of block structure:
| T -I |
|-I T -I |
| -I T |
| ... -I|
| -I T|
where each block is dimension nx by nx and the matrix is on the order of
nx*nx. The block T is a tridiagonal matrix.
*/
for (int i=0; i<NumMyElements; ++i) {
if (MyGlobalElements[i] == 0 || MyGlobalElements[i] == NumGlobalElements-1 ||
MyGlobalElements[i] == nx-1 || MyGlobalElements[i] == nx*(nx-1) ) {
NumNz[i] = 3;
}
else if (MyGlobalElements[i] < nx || MyGlobalElements[i] > nx*(nx-1) ||
MyGlobalElements[i]%nx == 0 || (MyGlobalElements[i]+1)%nx == 0) {
NumNz[i] = 4;
}
else {
NumNz[i] = 5;
}
}
// Create an Epetra_Matrix
RCP<Epetra_CrsMatrix> A = rcp (new Epetra_CrsMatrix (Epetra_DataAccess::Copy, Map, &NumNz[0]));
// Compute coefficients for discrete convection-diffution operator
const double one = 1.0;
std::vector<double> Values(4);
std::vector<int> Indices(4);
double rho = 0.0;
double h = one /(nx+1);
double h2 = h*h;
double c = 5.0e-01*rho/ h;
Values[0] = -one/h2 - c; Values[1] = -one/h2 + c; Values[2] = -one/h2; Values[3]= -one/h2;
double diag = 4.0 / h2;
int NumEntries;
for (int i=0; i<NumMyElements; ++i) {
if (MyGlobalElements[i]==0) {
Indices[0] = 1;
Indices[1] = nx;
NumEntries = 2;
int info = A->InsertGlobalValues(MyGlobalElements[i], NumEntries, &Values[1], &Indices[0]);
TEUCHOS_ASSERT( info==0 );
}
else if (MyGlobalElements[i] == nx*(nx-1)) {
Indices[0] = nx*(nx-1)+1;
Indices[1] = nx*(nx-2);
NumEntries = 2;
int info = A->InsertGlobalValues(MyGlobalElements[i], NumEntries, &Values[1], &Indices[0]);
TEUCHOS_ASSERT( info==0 );
}
else if (MyGlobalElements[i] == nx-1) {
Indices[0] = nx-2;
NumEntries = 1;
int info = A->InsertGlobalValues(MyGlobalElements[i], NumEntries, &Values[0], &Indices[0]);
TEUCHOS_ASSERT( info==0 );
Indices[0] = 2*nx-1;
info = A->InsertGlobalValues(MyGlobalElements[i], NumEntries, &Values[2], &Indices[0]);
TEUCHOS_ASSERT( info==0 );
}
else if (MyGlobalElements[i] == NumGlobalElements-1) {
Indices[0] = NumGlobalElements-2;
NumEntries = 1;
int info = A->InsertGlobalValues(MyGlobalElements[i], NumEntries, &Values[0], &Indices[0]);
TEUCHOS_ASSERT( info==0 );
Indices[0] = nx*(nx-1)-1;
info = A->InsertGlobalValues(MyGlobalElements[i], NumEntries, &Values[2], &Indices[0]);
TEUCHOS_ASSERT( info==0 );
}
else if (MyGlobalElements[i] < nx) {
Indices[0] = MyGlobalElements[i]-1;
Indices[1] = MyGlobalElements[i]+1;
Indices[2] = MyGlobalElements[i]+nx;
NumEntries = 3;
int info = A->InsertGlobalValues(MyGlobalElements[i], NumEntries, &Values[0], &Indices[0]);
TEUCHOS_ASSERT( info==0 );
}
else if (MyGlobalElements[i] > nx*(nx-1)) {
Indices[0] = MyGlobalElements[i]-1;
Indices[1] = MyGlobalElements[i]+1;
Indices[2] = MyGlobalElements[i]-nx;
NumEntries = 3;
int info = A->InsertGlobalValues(MyGlobalElements[i], NumEntries, &Values[0], &Indices[0]);
TEUCHOS_ASSERT( info==0 );
}
else if (MyGlobalElements[i]%nx == 0) {
Indices[0] = MyGlobalElements[i]+1;
Indices[1] = MyGlobalElements[i]-nx;
Indices[2] = MyGlobalElements[i]+nx;
NumEntries = 3;
int info = A->InsertGlobalValues(MyGlobalElements[i], NumEntries, &Values[1], &Indices[0]);
TEUCHOS_ASSERT( info==0 );
}
else if ((MyGlobalElements[i]+1)%nx == 0) {
Indices[0] = MyGlobalElements[i]-nx;
Indices[1] = MyGlobalElements[i]+nx;
NumEntries = 2;
int info = A->InsertGlobalValues(MyGlobalElements[i], NumEntries, &Values[2], &Indices[0]);
TEUCHOS_ASSERT( info==0 );
Indices[0] = MyGlobalElements[i]-1;
NumEntries = 1;
info = A->InsertGlobalValues(MyGlobalElements[i], NumEntries, &Values[0], &Indices[0]);
TEUCHOS_ASSERT( info==0 );
}
else {
Indices[0] = MyGlobalElements[i]-1;
Indices[1] = MyGlobalElements[i]+1;
Indices[2] = MyGlobalElements[i]-nx;
Indices[3] = MyGlobalElements[i]+nx;
NumEntries = 4;
int info = A->InsertGlobalValues(MyGlobalElements[i], NumEntries, &Values[0], &Indices[0]);
TEUCHOS_ASSERT( info==0 );
}
// Put in the diagonal entry
int info = A->InsertGlobalValues(MyGlobalElements[i], 1, &diag, &MyGlobalElements[i]);
TEUCHOS_ASSERT( info==0 );
}
// Finish up
int info = A->FillComplete ();
TEUCHOS_ASSERT( info==0 );
A->SetTracebackMode (1); // Shutdown Epetra Warning tracebacks
// Create a identity matrix for the temporary mass matrix
RCP<Epetra_CrsMatrix> M = rcp (new Epetra_CrsMatrix (Epetra_DataAccess::Copy, Map, 1));
for (int i=0; i<NumMyElements; i++) {
Values[0] = one;
Indices[0] = i;
NumEntries = 1;
info = M->InsertGlobalValues(MyGlobalElements[i], NumEntries, &Values[0], &Indices[0]);
TEUCHOS_ASSERT( info==0 );
}
// Finish up
info = M->FillComplete ();
TEUCHOS_ASSERT( info==0 );
M->SetTracebackMode (1); // Shutdown Epetra Warning tracebacks
//************************************
// Call the LOBPCG solver manager
//***********************************
//
// Variables used for the LOBPCG Method
const int nev = 10;
const int blockSize = 5;
const int maxIters = 500;
const double tol = 1.0e-8;
typedef Epetra_MultiVector MV;
typedef Epetra_Operator OP;
// Create an Epetra_MultiVector for an initial vector to start the
// solver. Note: This needs to have the same number of columns as
// the blocksize.
RCP<Epetra_MultiVector> ivec = rcp (new Epetra_MultiVector (Map, blockSize));
ivec->Random (); // fill the initial vector with random values
// Create the eigenproblem.
RCP<BasicEigenproblem<double, MV, OP> > MyProblem =
// Inform the eigenproblem that the operator A is symmetric
MyProblem->setHermitian (true);
// Set the number of eigenvalues requested
MyProblem->setNEV (nev);
// Inform the eigenproblem that you are finishing passing it information
const bool success = MyProblem->setProblem ();
if (! success) {
printer.print (Errors, "Anasazi::BasicEigenproblem::setProblem() reported an error.\n");
#ifdef HAVE_MPI
MPI_Finalize ();
#endif
return -1;
}
// Create parameter list to pass into the solver manager
//
MyPL.set ("Which", which);
MyPL.set ("Block Size", blockSize);
MyPL.set ("Maximum Iterations", maxIters);
MyPL.set ("Convergence Tolerance", tol);
MyPL.set ("Verbosity", verbosity);
// Create the solver manager
SimpleLOBPCGSolMgr<double, MV, OP> MySolverMan (MyProblem, MyPL);
// Solve the problem
ReturnType returnCode = MySolverMan.solve ();
// Get the eigenvalues and eigenvectors from the eigenproblem
Eigensolution<double, MV> sol = MyProblem->getSolution ();
std::vector<Value<double> > evals = sol.Evals;
RCP<MV> evecs = sol.Evecs;
// Compute residuals
std::vector<double> normR (sol.numVecs);
if (sol.numVecs > 0) {
Teuchos::SerialDenseMatrix<int,double> T (sol.numVecs, sol.numVecs);
Epetra_MultiVector tempAevec (Map, sol.numVecs );
T.putScalar (0.0);
for (int i = 0; i < sol.numVecs; ++i) {
T(i,i) = evals[i].realpart;
}
A->Apply (*evecs, tempAevec);
MVT::MvTimesMatAddMv (-1.0, *evecs, T, 1.0, tempAevec);
MVT::MvNorm (tempAevec, normR);
}
// Print the results
std::ostringstream os;
os.setf (std::ios_base::right, std::ios_base::adjustfield);
os << "Solver manager returned "
<< (returnCode == Converged ? "converged." : "unconverged.") << endl;
os << endl;
os << "------------------------------------------------------" << endl;
os << std::setw(16) << "Eigenvalue"
<< std::setw(18) << "Direct Residual"
<< endl;
os << "------------------------------------------------------" << endl;
for (int i = 0; i < sol.numVecs; ++i) {
os << std::setw(16) << evals[i].realpart
<< std::setw(18) << normR[i] / evals[i].realpart
<< endl;
}
os << "------------------------------------------------------" << endl;
printer.print (Errors, os.str ());
#ifdef HAVE_MPI
MPI_Finalize ();
#endif // HAVE_MPI
return 0;
}